CertsTopics Logo

Spring Sale 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: save70

Cisco 200-301 Based on Real Exam Environment

Page: 25 / 93
Total 1240 questions
Get 200-301 Full Access Download 200-301 PDF

Implementing and Administering Cisco Solutions (200-301 CCNA) v1.1 Questions and Answers

Question 97

Which type of network attack overwhelms the target server by sending multiple packets to a port until the half-open TCP resources of the target are exhausted?

Options:

A.

SYIM flood

B.

reflection

C.

teardrop

D.

amplification

Question 98

OSPF must be configured between routers R1 and R2. Which OSPF configuration must be applied to router R1 to avoid a DR/BDR election?

Options:

A.

router ospf 1network 192.168.1.1 0.0.0.0 area 0interface e1/1ip address 192.168.1.1 255.255.255.252ip ospf network broadcast

B.

router ospf 1network 192.168.1.1 0.0.0.0 area 0interface e1/1ip address 192.168.1.1 255.255.255.252ip ospf network point-to-point

C.

router ospf 1network 192.168.1.1 0.0.0.0 area 0interface e1/1ip address 192.168.1.1 255.255.255.252ip ospf cost 0

D.

router ospf 1network 192.168.1.1 0.0.0.0 area 0hello interval 15interface e1/1Ip address 192.168.1.1 255.255.255.252

Question 99

Refer to the exhibit.

All VLANs are present in the VLAN database. Which command sequence must be applied to complete the configuration?

Options:

A.

Interface FastEthernet0/1 switchport trunk native vlan 10 switchport trunk allowed vlan 10,15

B.

Interface FastEthernet0/1 switchport mode trunk switchport trunk allowed vlan 10,15

C.

interface FastEthernet0/1 switchport mode access switchport voice vlan 10

D.

Interface FastEthernet0/1 switchport trunk allowed vlan add 10 vlan 10 private-vlan isolated

Question 100

Refer to the exhibit.

How should the configuration be updated to allow PC1 and PC2 access to the Internet?

Options:

A.

Modify the configured number of the second access list.

B.

Add either the ip nat {inside|outside} command under both interfaces.

C.

Remove the overload keyword from the ip nat inside source command.

D.

Change the ip nat inside source command to use interface GigabitEthernet0/0.

Page: 25 / 93
Total 1240 questions
Get 200-301 Full Access Download 200-301 PDF