Ace Your 200-301 CCNA Exam

10.10.13.208/29. The scenario should be solved by matching the described behavior to the Cisco feature that actually performs it. Cisco CCNA 200-301 v1.1 includes this topic under IP Connectivity, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The other options are real networking terms or plausible phrases, but they operate at a different layer, solve a different problem, or do not create the outcome described. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

The correct response is D. Physical access control regulates access to networking equipment, rooms, racks, and facilities. Examples include locks, badges, guards, cameras, mantraps, and visitor controls around wiring closets and data centers. For Cisco CCNA 200-301 v1.1, the important point is the mechanism, not a generic description of the technology. Access to file systems and specific networks is logical access control, not physical access control. When this appears in a network, the symptom normally confirms the answer: the route installed, the state selected, the packet forwarded, the wireless client behaviour, or the management workflow will follow this rule. That is why this answer is the best fit for the scenario and not just a plausible networking term.

Answer D and E is the technically correct selection. When creating a WLAN on a Cisco WLC, the required identity fields include the profile name and SSID. The profile name identifies the WLAN object in the controller, and the SSID is the network name advertised or used by clients. This aligns with Cisco CCNA 200-301 v1.1 because the exam blueprint requires engineers to recognize operational behaviour from configuration symptoms and topology requirements. AP IP addresses and QoS settings can be adjusted elsewhere, but they are not the two required values in this creation step. Treat the distractors carefully: most are real Cisco terms, but they solve a different problem or operate at a different layer. The selected answer is the one that would be used by an engineer on the device or in the design to produce the outcome stated in the question.

active. Switching features such as trunks and EtherChannels are controlled by negotiation mode, encapsulation, VLAN membership, and whether the selected protocol is Cisco proprietary or standards based. Cisco CCNA 200-301 v1.1 includes this topic under Network Access, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The incorrect options either disable negotiation, select the wrong negotiation protocol, or configure a mode that cannot form the requested link under the stated conditions. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.