CertsTopics Logo

Summer Special - Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: top65certs

Free 300-410 Questions Attempt

Page: 3 / 46
Total 615 questions
Get 300-410 Full Access Download 300-410 PDF

Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) Questions and Answers

Question 9

Refer to the exhibit.

Mutual redistribution is enabled between RIP and EIGRP on R2 and R5. Which configuration resolves the routing loop for the 192.168.1.0/24 network?

Options:

A.

R2:router eigrp 10network 181.16.0.0redistribute rip metric 1 1 1 1 1distribute-list 1 in s1!router ripnetwork 178.1.0.0redistribute eigrp 10 metric 2!access-list 1 deny 192.168.1.0access-list 1 permit anyR5:router eigrp 10network 181.16.0.0redistribute rip metric 1 1 1 1 1distribute-list 1 in s0!router ripnetwork 178.1.0.0redistribute eigrp 10 metric 2!access-list 1 deny 192.168.1.0access-list 1 permit any

B.

R2:router eigrp 10network 181.16.0.0redistribute rip metric 1 1 1 1 1distribute-list 1 in s0!router ripnetwork 178.1.0.0redistribute eigrp 10 metric 2!access-list 1 deny 192.168.1.0access-list 1 permit anyR5:router eigrp 10network 181.16.0.0redistribute rip metric 1 1 1 1 1distribute-list 1 in s0!router ripnetwork 178.1.0.0redistribute eigrp 10 metric 2!access-list 1 deny 192.168.1.0access-list 1 permit any

C.

R2:router eigrp 10network 181.16.0.0redistribute rip metric 1 1 1 1 1distribute-list 1 in s0!router ripnetwork 178.1.0.0redistribute eigrp 10 metric 2!access-list 1 deny 192.168.1.0access-list 1 permit anyR5:router eigrp 10network 181.16.0.0redistribute rip metric 1 1 1 1 1distribute-list 1 in s1!router ripnetwork 178.1.0.0redistribute eigrp 10 metric 2!access-list 1 deny 192.168.1.0access-list 1 permit any

D.

R2:router eigrp 7network 181.16.0.0redistribute rip metric 1 1 1 1 1distribute-list 1 in s1!router ripnetwork 178.1.0.0redistribute eigrp 7 metric 2!access-list 1 deny 192.168.1.0access-list 1 permit anyR5:router eigrp 7network 181.16.0.0redistribute rip metric 1 1 1 1 1distribute-list 1 in s1!router ripnetwork 178.1.0.0redistribute eigrp 7 metric 2!access-list 1 deny 192.168.1.0access-list 1 permit any

Question 10

The network administrator configured R1 to authenticate Telnet connections based on Cisco ISE using TACACS+. ISE has been configured with an IP address of 192.168.1.5 and with a network device pointing toward R1(192.168.1.1) with a shared secret password of Cisco123.

The administrator cannot authenticate to R1 based on ISE. Which configuration fixes the issue?

Options:

A.

ip tacacs-server host 192.168.1.5 key Cisco123

B.

line vty 0 4login authentication TAC-SERV

C.

line vty 0 4login authentication telnet

D.

tacacs-server host 192.168.1.5 key Cisco123

Question 11

Which mechanism must be chosen to optimize the reconvergence time for OSPF at company location 407173257 that is less CPU-intensive than reducing the hello and dead timers?

Options:

A.

BFD

B.

Dead Peer Detection keepalives

C.

SSO

D.

OSPF demand circuit

Question 12

R1 and R2 are configured as eBGP neighbor , R1 is in AS100 and R2 is in AS200. R2 is advertising these networks to R1:

The network administrator on R1 must improve convergence by blocking all subnets of 172-16.0.0/16 major network with a mask lower than 23 from coming in, Which set of configurations accomplishes the task on R1?

Options:

A.

ip prefix-list PL-1 deny 172.16.0.0/16 le 23ip prefix-list PL-1 permit 0.0.0.0/0 le 32!router bgp 100neighbor 192.168.100.2 remote-as 200neighbor 192.168.100.2 prefix-list PL-1 in

B.

ip prefix-list PL-1 deny 172.16.0.0/16 ge 23ip prefix-list PL-1 permit 0.0.0.0/0 le 32!router bgp 100neighbor 192.168.100.2 remote-as 200neighbor 192.168.100.2 prefix-list PL-1 in

C.

access-list 1 deny 172.16.0.0 0.0.254.255access-list 1 permit any!router bgp 100neighbor 192.168.100.2 remote-as 200neighbor 192.168.100.2 distribute-list 1 in

D.

ip prefix-list PL-1 deny 172.16.0.0/16ip prefix-list PL-1 permit 0.0.0.0/0!router bgp 100neighbor 192.168.100.2 remote-as 200neighbor 192.168.100.2 prefix-list PL-1 in

Page: 3 / 46
Total 615 questions
Get 300-410 Full Access Download 300-410 PDF