Online 350-601 Questions Video

In the context of Cisco ACI (Application Centric Infrastructure), TEP (Tunnel Endpoint) addresses are used for encapsulating and forwarding traffic within the fabric. The next hop addresses mentioned in options A and D are indicative of TEP addresses, which are typically assigned to border leaf switches within the ACI fabric. These border leaf switches are responsible for routing traffic between the ACI fabric and external networks.

• Option A is correct because the next hop 10.0.1.14 for the route 172.16.99.0/24 is consistent with the TEP address format used in ACI, suggesting it is the TEP address of a border leaf.
• Option D is also correct as the next hop 10.1.168.95 for the route 172.16.100.0/24 follows the TEP address pattern, indicating it is the TEP address of another border leaf in ACI.

 The file is queued for upload when connectivity is restored

To create an environment variable that can be used by several policies in the Embedded Event Manager, the engineer should use the command N9k2 (config)# event manager environment mailserver ‘’10.10.10.10’’. This command defines a global environment variable named mailserver with the value of 10.10.10.10, which represents the external email server. The environment variable can then be referenced by any policy that needs to use the email server in its actions, such as sending notifications or alerts. The environment variable can also be modified or deleted as needed. The other commands are incorrect because they either use the wrong mode, the wrong keyword, or the wrong syntax. References :=

• Implementing and Operating Cisco Data Center Core Technologies (DCCOR) v1.2, Module 3: Data Center LAN Network Connectivity, Lesson 3.4: Cisco Nexus 9000 Series Switches
• Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 9.3(x), Chapter: Configuring Embedded Event Manager

 Starting a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge will result in the zone merge process stopping. This is to prevent any conflicts or issues that may arise from performing two significant operations simultaneously.

cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/upgrade/602_N2_2/n5500_upgrade_downgrade_602_n2_2.html