Online N10-009 Questions Video

Ping sends ICMP Echo Request packets and waits for Echo Replies to verify host reachability and measure round-trip time.

A. tcpdump captures packets but does not test reachability.

B. netstat displays open ports and network sessions.

C. nslookup queries DNS servers for name resolution.

References (CompTIA Network+ N10-009):

Domain: Networking Concepts — ICMP operation, troubleshooting tools.

Understanding Link Aggregation:

Definition: Link aggregation combines multiple network connections into a single logical link to increase bandwidth and provide redundancy.

Usage in High-Bandwidth Scenarios:

Combining Links: By aggregating multiple 1Gbps connections, the facility can utilize the full 2.5Gbps bandwidth provided by the ISP.

Benefits: Enhanced throughput, load balancing, and redundancy, ensuring better utilization of available bandwidth.

Comparison with Other Options:

802.1Q Tagging: Used for VLAN tagging, which does not affect the physical bandwidth utilization.

Network Address Translation (NAT): Used for IP address translation, not related to link speed or bandwidth aggregation.

Port Duplex: Refers to the mode of communication (full or half duplex) on a port, not the aggregation of bandwidth.

Implementation:

Configure link aggregation (often referred to as LACP - Link Aggregation Control Protocol) on network devices to combine multiple physical links into one logical link.

The correct answer is Spanning Tree because broadcast storms are typically caused by Layer 2 switching loops in Ethernet networks. According to the CompTIA Network+ (N10-009) objectives under switching concepts, the Spanning Tree Protocol (STP) is specifically designed to prevent loops in networks that have redundant switch connections.

In a Layer 2 environment, switches forward broadcast frames out all ports except the one on which they were received. If redundant paths exist without STP, frames can circulate indefinitely, creating a broadcast storm. This results in excessive traffic, high CPU utilization on switches, MAC address table instability, and significant network performance degradation.

STP prevents this by logically blocking redundant paths while maintaining them as backups. If the active path fails, STP recalculates and activates a previously blocked path, preserving redundancy without loops.

The other options—EIGRP and BGP (routing protocols) and CDP and LLDP (device discovery protocols)—do not prevent Layer 2 loops.

Therefore, configuring Spanning Tree Protocol is the appropriate solution to mitigate broadcast storms.

When a DHCP server is installed and not enough IP addresses are provisioned, users may start experiencing network outages once the available IP addresses are exhausted. DHCP servers assign IP addresses to devices on the network, and if the pool of addresses is too small, new devices or those renewing their lease may fail to obtain an IP address, resulting in network connectivity issues.References: CompTIA Network+ study materials.