N10-009 VCE Exam Download

An incorrect pinout on the patch cable could prevent network connectivity due to mismatched wiring. Even if the cables are the correct length and type, a pinout issue can cause continuity problems and prevent data transmission. Proper crimping with the correct pinout is essential for network cables to function. (Reference: CompTIA Network+ Study Guide, Chapter on Network Media and Topologies)

On Core-SW01, the ports are configured with LACP (mode active) for link aggregation. On Core-SW02, the ports are configured as independent trunks, not as part of an LACP group. Because of this mismatch, LACP cannot form the bundle, and the aggregated ports on SW01 will go into a suspended state.

A. CRC errors suggest cabling or signal integrity issues, not config mismatch.

B. Error disabled occurs when a violation (like BPDU guard or port security) disables the port, not LACP mismatch.

C. Administratively down indicates a shutdown command, not the case here.

References (CompTIA Network+ N10-009):

Domain: Network Troubleshooting — Port-channel/LACP configuration issues, interface states.

Comprehensive and Detailed Explanation (paraphrased, aligned to N10-009):

SSH provides secure, scriptable remote access used by automation/orchestration tools (e.g., leveraging CLI, NETCONF over SSH, or Ansible modules) to push configurations at scale.

A. RDP is primarily for Windows GUI sessions and is not commonly used for network device automation.

B. Telnet can be scripted but is insecure (plaintext); modern best practice is to use SSH.

D. GUI access is typically manual and not ideal for scalable, repeatable automation.

References (CompTIA Network+ N10-009):

Domain: Network Operations — Configuration management, automation/orchestration, secure management protocols (SSH vs. Telnet), change at scale.

===========

TCP port 443 is reserved for HTTPS (Hypertext Transfer Protocol Secure), which uses TLS encryption to secure web traffic. It is the standard port for encrypted web communications.

A. Telnet uses TCP port 23.

B. SMTP commonly uses TCP ports 25, 465, or 587.

D. SNMP typically uses UDP ports 161 (queries) and 162 (traps).

References (CompTIA Network+ N10-009):

Domain: Network Standards, Protocols, and Implementations — Common ports and services.