Vce 220-1201 Questions Latest

A VLAN (Virtual Local Area Network) segments a physical network into separate logical networks, enhancing security by isolating traffic.

Why Not A (Minimizes collision domains): VLANs manage broadcast domains, not collision domains.

Why Not B (Provides private access to cloud resources): VLANs operate within a local network, not cloud-specific.

Why Not C (Increases network address space): VLANs do not affect address space.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 2.6, VLAN concepts​.

CompTIA A+ details that an Automatic Document Feeder (ADF) allows multi-page documents to be scanned automatically without manually placing each sheet on the flatbed. This drastically increases scanning efficiency for large documents.

Flatbed scanners require manual placement for every page. Duplexing scans both sides of a page but does not feed multiple sheets by itself. Orientation configuration only affects image alignment.

The ADF is explicitly highlighted in the A+ study guide as the primary feature used in business environments when scanning high-volume documents efficiently.

Thus, the ADF is the correct solution because it automates page feeding and dramatically reduces scanning time, especially for hundreds of pages.

802.11ac is a Wi-Fi standard that primarily operates in the 5GHz band and is known for higher throughput and improved performance compared with older 2.4GHz-focused standards. In CompTIA A+ Core 1 networking objectives, you are expected to recognize which IEEE 802.11 standards map to which frequency bands and the typical trade-offs. The 5GHz band generally provides more available non-overlapping channels and less interference from common household devices (like microwaves and many Bluetooth peripherals), which can improve real-world performance. While 5GHz typically has shorter range and weaker wall penetration than 2.4GHz, it often delivers better speeds in the same-room or nearby-room scenarios, which aligns with how 802.11ac is commonly deployed.

Bluetooth primarily uses the 2.4GHz ISM band and is designed for short-range personal area networking rather than high-speed WLAN connections. NFC operates at 13.56MHz for very short-range tap-based communications. RFID can operate at several bands (low frequency, high frequency, ultra-high frequency) depending on the use case, but it is not a Wi-Fi networking standard and does not “primarily” operate at 5GHz. Therefore, the correct answer is 802.11ac.