CompTIA 220-1201 Actual Questions

Application virtualization allows legacy software to run in a virtualized environment while the operating system remains current. It isolates the application from the OS, ensuring compatibility without downgrading the OS.

Why Not A (Shared resources): This relates to resource sharing, not application compatibility.

Why Not B (System sandbox): Sandboxes isolate applications for security testing, not compatibility.

Why Not C (Test development): Test environments are used for development, not running legacy applications.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 4.2, virtualization concepts​.

A tablet’s display is made of two key parts that work together: the LCD (or OLED) that shows the image, and the digitizer that detects touch input. If the screen image looks normal but the device does not respond to taps, swipes, or gestures, the most likely failed component is the digitizer (or the digitizer layer/cable). The digitizer is a transparent sensor grid that converts touch into signals the system can interpret. When it fails, the tablet may still power on and show a clear picture, but touch will not register at all or will behave erratically.

Because the device shows no physical damage and a system reset does not fix the issue, this points away from a software glitch and toward a hardware input failure. Replacing the LCD screen is typically indicated when you see display problems such as no image, distorted colors, flickering, dead pixels, or backlight issues—not purely touch failure. A battery problem would affect power/charging, not touch responsiveness. A motherboard replacement is far more invasive and not the most likely first hardware fix for a touch-only failure. Therefore, the correct component to replace is the digitizer.

Comprehensive and Detailed Explanation

CompTIA A+ describes swollen or warped laptop chassis components as a classic symptom of a failing or swollen lithium-ion battery.

A swollen battery can:

Warp the keyboard

Push the bottom panel outward

Bend or distort the laptop frame

This is a safety hazard and requires immediate replacement.

Why the other answers are incorrect

B. RAM – Cannot cause physical warping.

C. Keyboard – May fail electronically, but does not physically deform itself.

D. HDD – Located away from the keyboard and cannot distort the chassis.

Final Answer: A

A red status light on a server or storage-array drive bay commonly indicates that the installed hard drive has failed or has entered a fault state. Enterprise storage bays use indicator lights to show drive activity, identification, rebuilding, predictive failure, or complete failure. Although the exact colour pattern can vary by manufacturer, a persistent red or amber fault indicator normally requires the technician to check the storage controller and replace the affected drive according to the system’s hot-swap and RAID procedures. A failing power supply would normally activate an indicator on the power-supply module rather than an individual storage bay. A drive missing from the operating system could result from a controller, cable, configuration, or drive problem, but the red bay light more directly identifies a physical drive fault. Slow read/write performance alone does not normally activate a solid failure indicator.