A+ 220-1201 Book

When port issues persist after moving to a different switch port, the next logical troubleshooting step is to test the patch cable. Faulty or damaged cables are a common cause of network connectivity problems. Using a cable tester between the computer and the network closet verifies the integrity of the cable and rules out a physical layer issue.

From CompTIA A+ 220-1101 Official Study Guide, Objective 4.2 – Troubleshoot wired and wireless networks:

“If a device continues to experience connectivity issues after switching ports, test the cabling with a cable tester to check for continuity, shorts, or pinout issues before replacing hardware.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: Troubleshooting Network Connectivity

CompTIA Exam Objectives 220-1101, Domain 4.2

============

Since only one user experiences the issue in a shared environment where everyone else has stable connectivity, CompTIA A+ suggests that the problem is most likely with the client device, not the network. The wireless card may be failing, overheating, or experiencing intermittent hardware faults.

If other Wi-Fi signals or EMI (electromagnetic interference) were the cause, multiple users would be affected. Frequency congestion (Option B) also impacts groups, not a single device.

CompTIA stresses that isolating whether the issue affects one user or many helps determine whether the fault lies with the network or device. Because the problem is isolated, the most probable cause is a malfunctioning wireless NIC in the user’s laptop.

RAID 1, also known as disk mirroring, duplicates data identically to two drives, ensuring full redundancy if one drive fails. Because the workstation only has two drives, RAID 1 is the only RAID level that provides fault tolerance under this constraint, exactly as described in the CompTIA A+ study guide.

RAID 0 offers no redundancy, RAID 5 requires at least three drives, and RAID 10 requires at least four drives.

RAID 1 is the recommended configuration for small environments or workstations that rely on data integrity and quick recovery, matching CompTIA’s guidance for redundancy in systems with limited drive availability.

CompTIA A+ emphasizes virtualization as an ideal solution during system phase-out or transition periods. The correct approach here is a P2V (physical-to-virtual) conversion and hosting the server in an Infrastructure as a Service (IaaS) environment. This removes the need for physical hardware while still keeping the application operational for its final year. IaaS provides full control over OS and applications, making it suitable for legacy systems that cannot be rewritten.

Colocation (Option A) still requires physical hardware. PaaS (Option C) is inappropriate because PaaS requires rewriting or replatforming the application. Shutting down the server after a backup (Option D) makes the application immediately unusable.

Thus, the best method is to convert to a virtual machine and host it on IaaS.