220-1201 Exam Results

CompTIA A+ teaches that RAID 6 is the RAID level that uses double parity, allowing the array to survive the failure of two drives simultaneously. RAID 6 stripes data across all disks like RAID 5 but stores two independent sets of parity information, making it far more fault-tolerant.

RAID 0 has no parity and provides only performance. RAID 1 mirrors data but uses no parity. RAID 5 uses single parity and can tolerate only one disk failure. Because the question explicitly asks for double parity, only RAID 6 is correct.

Clock frequency is one of the most significant factors influencing a computer system’s processing performance. According to CompTIA Core 1 (220-1201) CPU and performance objectives, clock speed—measured in gigahertz (GHz)—determines how many instruction cycles a processor can perform per second.

Higher clock frequencies generally result in faster execution of instructions, leading to improved performance in both single-threaded and multi-threaded workloads. While modern CPUs also rely on core count, cache size, and architecture efficiency, clock frequency remains a primary metric for evaluating raw processing speed.

An integrated GPU affects graphics performance rather than overall CPU processing capability. Power connectors ensure proper electrical delivery but do not directly improve processing performance. The voltage regulator module (VRM) stabilizes and regulates power supplied to the CPU but does not itself increase processing speed.

CompTIA expects candidates to recognize clock frequency as a key determinant of CPU performance when upgrading or comparing processors.

A DHCP reservation binds a specific MAC address to an IP address so the device always receives the same IP from the DHCP server. This ensures network devices like printers maintain consistent connectivity and availability even when the IP pool is low.

If a printer is set to use a special tray (for cards/invitations) but a different type of print job is attempted (like a letter), a paper tray setting mismatch can cause errors. Changing the tray setting to match the print media resolves the issue.

From CompTIA A+ 220-1101 Official Study Guide, Objective 4.3 – Troubleshooting printers:

“If print jobs fail when media type changes, verify and adjust the paper tray settings to match the required output.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: Printer Troubleshooting

CompTIA Exam Objectives 220-1101, Domain 4.3

============