Legit LEED-Green-Associate Exam Download

 Volatile organic compounds (VOCs) are compounds that have a high vapor pressure and low water solubility, and are emitted as gases from certainsolids or liquids1. VOCs include a variety of chemicals, some of which may have short- and long-term adverse health effects2. Concentrations of many VOCs are consistently higher indoors (up to ten times higher) than outdoors2. VOCs are emitted by a wide array of products, such as paints, solvents, cleaners, fuels, pesticides, building materials, office equipment, etc2. Breathing VOCs can irritate the eyes, nose andthroat, can cause difficulty breathing and nausea, and can damage the central nervous system and other organs3. Some VOCs can cause cancer3. Therefore, VOCs negatively impact the quality of indoor air, which is option B.

The Energy and Atmosphere (EA) category addresses the energy performance, efficiency, and renewable sources of buildings. One of the credits in this category is EA Credit: Enhanced Refrigerant Management, which aims to reduce the emissions of ozone-depleting substances and greenhouse gases from refrigeration and air-conditioning equipment. Refrigerants are substances that are used to transfer heat in cooling systems. Some refrigerants have high global warming potential (GWP) and ozone depletion potential (ODP), which means they can contribute to climate change and damage the ozone layer if they leak or are improperly disposed of. Enhanced refrigerant management involves selecting refrigerants with low GWP and ODP, minimizing refrigerant charge size, and preventing or detecting leaks12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

The amount of flow rate per fixture is the correct answer because indoor water use reduction in LEED is calculated by comparing the baseline fixture flow and flush rates with the design case. Flow fixtures, such as faucets and showerheads, are measured in gallons per minute, while flush fixtures, such as toilets and urinals, are measured in gallons per flush. Lower flow or flush rates help reduce potable water consumption when fixtures meet performance requirements. Maintenance frequency may affect long-term performance but is not the main calculation factor. Installation location may influence fixture type, but not the direct water-use reduction value. Color and finish do not affect water efficiency. LEED water calculations rely heavily on fixture performance data and occupant-use assumptions.

Energy use intensity (EUI) is a measure of energy use per unit of floor space. It is calculated by dividing the total energy consumed by the building in one year (measured in kilowatt-hours or kilo- British Thermal Units) by the total gross floor area of the building (measured in square feet or square meters). EUI is a useful metric for comparing the energy performance of different buildings or benchmarking against national averages. EUI can vary depending on building type, climate, occupancy, and other factors. Generally, a lower EUI indicates better energy efficiency and lower environmental impact. References: What is Energy Use Intensity (EUI)?2; Energy Use Intensity (EUI)3