LEED-Green-Associate Premium Exam Questions

Drip irrigation is a method of watering plants that delivers water directly to the roots through a network of pipes, tubes, valves, and emitters. Drip irrigation is not a plumbingfixture, but a landscaping technique that can reduce outdoor water use by minimizing evaporation, runoff, and overspray12.

Plumbing fixtures are devices that provide water for various purposes, such as washing, bathing, cooking, or flushing. Plumbing fixtures include urinals, showerheads, kitchen faucets, and other types of faucets, toilets, bidets, and sinks. Plumbing fixtures are subject to indoor water use reduction strategies in LEED certification, such as installing low-flow or high-efficiency models, using automatic sensors or timers, or implementing water reuse systems34.

Open grid pavement, also known as permeable pavement, allows water to drain through it, reducing runoff and recharging groundwater supplies. It also tends to be lighter in color than traditional asphalt, which means it absorbs less heat from sunlight. This helps to reduce the urban heat island effect, which is a phenomenon where urban areas are significantly warmer than their rural surroundings due to human activities. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Graywater refers to relatively clean wastewater from domestic activities such as washing dishes, laundry, and bathing. Water from lavatory faucets falls into this category. Graywater can be treated and reused for non-potable purposes such as toilet flushing or irrigation, which can help conserve water. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Rainwater storage cisterns are components of a collected rainwater irrigation system that are most likely to make it cost prohibitive over a conventional system in a large site that has a short, intense rainy season and a long, dry season. A collected rainwater irrigation system is a system that collects, stores, and distributes rainwater for irrigation purposes. Rainwater storage cisterns are containers that store the collected rainwater until it is needed for irrigation. In a large site that has a short, intense rainy season and a long, dry season, the rainwater storage cisterns would need to be very large and durable to capture and store enough rainwater for the dry season. This would increase the initial cost and maintenance cost of the system compared to a conventional system that uses potable water or groundwater for irrigation1 . References: LEED v4 Green Associate Candidate Handbook1, EPA’s Rainwater Harvesting