Instance 1 = VLANs 4,6 Instance 2 = VLANs 5,7Switch 2 instance 1 priority = 0 Switch 2 instance 2 priority = 1Switch 3 instance 1 priority = 0 Switch 3 instance 2 priority = 1

Instance 1 = VLANs 4-5 Instance 2 = VLANs 6-7Switch 2 instance 1 priority = 0 Switch 2 instance 2 priority = 1Switch 3 instance 1 priority = 0 Switch 3 instance 2 priority = 1

Instance 1 = VLANs 4,6 Instance 2 = VLANs 5,7Switch 2 instance 1 priority = 0 Switch 2 instance 2 priority = 1Switch 3 instance 1 priority = 1 Switch 3 instance 2 priority = 0

Instance 1 = VLANs 4-5 Instance 2 = VLANs 6-7Switch 2 instance 1 priority = 0 Switch 2 instance 2 priority = 1Switch 3 instance 1 priority = 1 Switch 3 instance 2 priority = 0

a hardware issue, such as a broken cable

asymmetric routing introduced by a routing configuration error

an issue with queuing, caused by mismatched QoS settings

mismatched IP addresses on the VLAN for the link

The switch defines the AirWave IP address in its zero touch provisioning (ZTP) profile.

The switch specifies the AirWave IP address for the RADIUS server used for Telnet and SSH authentication.

The switch is authorized in AirWave, which has the correct credentials to log in as a CLI manager.

The switch is set to Manage Read-Write mode in AirWave but is not set to Monitor Only + Firmware Updates.