Pass SK0-005 Exam Guide

The most likely cause of this issue is that the UEFI boot was interrupted by a missing Linux boot file, such as grub.cfg or vmlinuz, which are essential for loading the Linux kernel and booting the system. The £s> prompt indicates that the system entered into UEFI Shell mode, which is a command-line interface for troubleshooting UEFI boot issues. The administrator can use UEFI Shell commands to locate and restore the missing boot file or change the boot order. Verified References: [UEFI Shell Guide]

A DHCP reservation is a way to assign a specific IP address to a device based on its MAC address, which is a unique identifier for each network interface card (NIC). When the administrator replaced the NIC, the MAC address of the server changed, and the DHCP server no longer recognized it as the same device. Therefore, the DHCP server assigned a different IP address to the server, which was incorrect for the application. To fix this problem, the administrator needs to modify the DHCP reservation to use the new MAC address of the NIC, so that the server can get the proper IP address.

A WWNN (World Wide Node Name) is a unique identifier for a Fibre Channel node, which is a device that can communicate over a Fibre Channel network. A WWNN is not related to DHCP or IP addresses, and it is not used for DHCP reservations. Therefore, options B and D are incorrect.

Updating the local hosts file with the correct IP address (option C) is also incorrect, because it does not solve the problem of getting the correct IP address from the DHCP server. The hosts file is a local file that maps hostnames to IP addresses, and it is used to override DNS queries. However, it does not affect how the DHCP server assigns IP addresses to devices. Moreover, updating the hosts file manually on every device that needs to communicate with the server is not a scalable or efficient solution.

References:

• How to reserve IP Address in DHCP Server - Ask Ubuntu
• Static IP vs DHCP Reservation - The Tech Journal
• How to Configure DHCP Server Reservation in Windows … - ITIngredients

#! is the symbol that should be placed at the top of a Bash script to ensure it can be executed. #! is also known as shebang or hashbang. It is a special notation that tells the operating system which interpreter to use to run the script. The shebang is followed by the path to the interpreter, such as /bin/bash for Bash, /bin/python for Python, or /bin/perl for Perl. For example, a Bash script that prints “Hello World” would start with:

#!/bin/bash echo “Hello World”

The shebang must be the first line of the script and must not have any spaces between the # and ! symbols. bash is not a valid shebang by itself, as it does not specify the path to the interpreter. !execute is not a valid shebang at all, as it does not start with #. @echo off is a command that disables the echoing of commands in a batch file on Windows, but it has nothing to do with Bash scripts on Linux. References:

The reason why the Linux server is not communicating on a network is that it is configured to use DHCP on a network that does not have a DHCP server. DHCP (Dynamic Host Configuration Protocol) is a protocol that allows a client device to obtain an IP address and other network configuration parameters from a DHCP server automatically. However, if there is no DHCP server on the network, the client device will not be able to obtain a valid IP address and will assign itself a link-local address instead. A link-local address is an IP address that is only valid within a local network segment and cannot be used for communication outside of it. A link-local address has a prefix of 169.254/16 in IPv4 or fe80::/10 in IPv6. In this case, the Linux server has assigned itself a link-local address of 127.0.0.1, which is also known as the loopback address. The loopback address is used for testing and troubleshooting purposes and refers to the device itself. It cannot be used for communication with other devices on the network.