CompTIA SK0-005 Based on Real Exam Environment

The most appropriate native protocol to use for connecting a Linux server to a share on a NAS is NFS. NFS (Network File System) is a protocol that allows file sharing and remote access over a network. NFS is designed for Unix-like operating systems, such as Linux, and supports features such as symbolic links, hard links, file locking, and file permissions. NFS uses mount points to attach remote file systems to local file systems, making them appear as if they are part of the local file system. NFS can provide fast and reliable access to files stored on a NAS (Network Attached Storage), which is a device that provides centralized storage for network devices.

The most likely cause of this issue is that the printer had DHCP enabled, which changed its IP address after adding it to the print server and configuring it on each user’s machine. DHCP (Dynamic Host Configuration Protocol) is a network protocol that assigns IP addresses and other network configuration parameters to devices automatically, without manual intervention. DHCP can simplify network management and avoid IP conflicts, but it can also cause problems if the devices are not configured to use static or reserved IP addresses. If the printer had DHCP enabled, it might have received a different IP address from the DHCP server after rebooting or reconnecting to the network, which would make it unreachable by the print server and the users’ machines that were configured with the previous IP address. Scanning to email would still work, as it does not depend on the print server or the users’ machines, but on the printer’s SMTP settings and internet connection. References: [CompTIA Server+ Certification Exam Objectives], Domain 4.0: Networking, Objective 4.l: Given a scenario, configure network settings for servers.

RAID 10 is the RAID level that will yield the best combination of available space and redundancy when configuring a new server for use as a database server with two mirrored drives for the operating system and three drive bays remaining for storage. RAID 10, also known as RAID 1+0, is a RAID configuration that combines disk mirroring and disk striping to protect data. It requires a minimum of four disks and stripes data across mirrored pairs. As long as one disk in each mirrored pair is functional, data can be retrieved. RAID 10 provides high performance, fault tolerance, and fast recovery, but it reduces storage capacity by half. RAID 0 is a RAID configuration that splits data across two or more drives without parity or redundancy. It improves performance but offers no fault tolerance. If one drive fails in RAID 0, all data is lost and the system cannot boot. RAID 1 is a RAID configuration that duplicates data across two or more drives. It provides fault tolerance and improves read performance, but reduces storage capacity by half. If one drive fails in RAID 1, the other drive can continue to operate without data loss or system downtime. RAID 5 is a RAID configuration that stripes data across three or more drives with parity information. It provides fault tolerance and improves performance, but reduces storage capacity by one drive’s worth of space. RAID 5 can tolerate one drive failure without data loss, but not two or more. References: at-is-the-difference-between-127.0.0.1-and-0.0.0.0/

Two-person integrity is a security measure that can be implemented to increase security against a potential insider threat on an air-gapped system. An air-gapped system is a system that is isolated from any network connection and can only be accessed physically. An insider threat is a malicious actor who has authorized access to an organization’s system or data and uses it for unauthorized or harmful purposes. Two-person integrity is a system of storage and handling that requires the presence of at least two authorized persons, each capable of detecting incorrect or unauthorized security procedures, for accessing certain sensitive data or material. This way, no single person can compromise the security or integrity of the data or material without being noticed by another person. SSO (Single Sign-On) is a feature that allows users to access multiple applications or systems with one set of credentials, but it does not prevent insider threats. SIEM (Security Information and Event Management) is a tool that collects and analyzes log data from various sources to detect and respond to security incidents, but it does not work on air-gapped systems. A Faraday cage is a structure that blocks electromagnetic signals from entering or leaving, but it does not prevent physical access or insider threats. MFA (Multi-Factor Authentication) is a method that requires users to provide two or more pieces of evidence to verify their identity, such as something they know, something they have, or something they are, but it does not prevent insider threats. References: