CertsTopics Logo

Labour Day Special - Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: top65certs

Selected H13-629_V2.0 HCIE-Storage Questions Answers

Page: 14 / 14
Total 363 questions
Get H13-629_V2.0 Full Access Download H13-629_V2.0 PDF

HCIE-Storage (Written) v2.0 Questions and Answers

Question 53

In a A VTL6900-I system, the backup server connected to it is the Linux operating system. The backup server and the VTL6900-I system are directly connected through the FC.

The server identifies the device information as shown below. After the backup server is configured as a backup client for the VTL6900-I system and the backup VTL system on the server virtual library process, which the following operation and description is correct:

(Multiple choice.)

Options:

A.

When configuring thebackup client on the VTL side, you need to know that the WWPN of the FC port that connects the VTL to the VTL is available on the server in the sys /class / fc_host directory and subdirectory to the corresponding WWPN port.

B.

Server-side identification has been detected with the library device command is cat / proc / scsi / scsi.

C.

As shown in the figure, among the devices identified on the server side, the device labeled 1 is the scanned library.

D.

As shown in the figure, of the devices identified on the server side, the device labeled 2 is the information for the scanned tape.

Question 54

A N8500 (V200R001) clustered NAS system with a set of storage units at the back end. Three RAID Groups, respectively named RG1, RG2, RG3 have been created on the storage unit. There are two LUNs under each RAID group, the capacity of each LUN is 12G.

The names are RG1-LUN1, RG1-LUN2, RG2-LUN1,RG2-LUN2, RG3-LUN1, RG3-LUN2, and all LUNs are added to one in storage pool. The purpose is to create a file system based on these LUNs. What of the following will certainly create a failure?

Options:

A.

fs create striped fs01 10g 3 RG1-LUN1, RG2-LUN1, RG3-LUN1 stripeunit = 2048 blksize = 8192

B.

fs create mirrored fs02 10g 2 RG1-LUN2, RG2-LUN2 stripeunit = 2048 blksize = 8192

C.

fs create mirrored-stripe fs03 10g 2 2 RG1-LUn1, RG2-LUN1 protection = disk stripeunit = 2048 blksize = 8192

D.

fs create striped-miiro fs04 20g 2 3 RG1-LUn1, RG1-LUN2, RG2-LUN1, RG2-LUN2, RG3-LUN1, RG3-LUN2 protection = disk stripeunit = 512 blksize = 1024

Page: 14 / 14
Total 363 questions
Get H13-629_V2.0 Full Access Download H13-629_V2.0 PDF