CDCP Exam Results

A fire extinguisher in the data centre that is classed as ABC is not suitable, because it contains dry chemical powder that can damage the ICT equipment and the data. ABC fire extinguishers are designed to fight Class A, B, and C fires, which are fueled by combustible materials, flammable liquids or gases, and electrical equipment, respectively. However, the dry chemical powder can leave a corrosive residue on the ICT equipment, which can cause short circuits, data loss, or malfunction. Moreover, the dry chemical powder can be difficult to clean, especially from the small spaces and crevices of the ICT equipment. Therefore, ABC fire extinguishers are not recommended for data centres, and should be replaced with more suitable fire extinguishers, such as clean agent fire extinguishers, which use gas or liquid that does not leave any residue or harm the ICT equipment.

MTBF stands for Mean Time Between Failures, and it is the arithmetic mean of time between the failing and the subsequent running of the system in a particular time period. MTBF is a measure of reliability that indicates how often a system or component fails during its operation. MTBF can be calculated by dividing the total operating time by the number of failures over a given period. For example, if a system operates for 1000 hours and experiences 5 failures, the MTBF is 1000/5 = 200 hours.

According to the IEEE definition, reliability is the ability of a system or component to perform its required functions under stated conditions for a specified period of time. Reliability is a measure of how often a system or component fails, and how long it takes to recover from a failure. Reliability is closely related to availability, which is the degree to which a system or component is operational and accessible when required for use. Reliability and availability are both affected by factors such as design, maintenance, testing, and environmental conditions.

VESDA (Very Early Smoke Detection Apparatus) or HSSD (High Sensitivity Smoke Detection) systems are the fastest smoke sensors among the options listed. These systems use a network of pipes to draw air samples from the protected area and analyze them using a laser-based detection chamber. VESDA/HSSD systems can detect smoke at very low concentrations, typically in the range of 0.005 to 20 percent obscuration per meter. This means they can provide early warning of a fire before it becomes visible or spreads. VESDA/HSSD systems are ideal for data centers and other critical facilities that require high levels of fire protection and minimal downtime.