Summer Special Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 60certs

Citrix 1Y0-301 Dumps

Page: 1 / 4
Total 112 questions

Deploying Citrix XenDesktop 7.6 Solutions Questions and Answers

Question 1

During the testing of a NetScaler high availability setup where two-factor authentication has been verified, new user connections are failing due to authentication issues.

What should a Citrix Engineer do to resolve this issue?

Options:

A.

Ensure that the SSL Gateway VIP is resolvable in DNS.

B.

Ensure that the RADIUS server hostname is resolvable in DNS.

C.

Ensure that the NetScaler LDAP account has permission to view records in Active Directory.

D.

Ensure that the NSIP addresses of both NetScalers are configured as clients on the RADIUS server.

Question 2

Scenario: After configuring high availability for StoreFront servers on the same VLAN, users report intermittent issues accessing Receiver for Web. The NetScaler monitors show both StoreFront servers in an UP state.

What could be causing the issue?

Options:

A.

The Citrix XML monitor is misconfigured.

B.

NetScaler is using a ping monitor to check the status of the StoreFront servers.

C.

The StoreFront servers are configured for SSL, but NetScaler is using HTTP monitor.

D.

Routing issues are preventing NetScaler from reaching one of the StoreFront servers.

Question 3

Where could a Citrix Engineer check which virtual channels are active in a user session?

Options:

A.

Citrix Studio

B.

Citrix Director

C.

Resource Monitor

D.

NetScaler Insight Center

Question 4

While testing a Delivery Group prior to roll out, a Citrix Engineer notes that closing an application and then launching another takes as long as the first logon of the day.

What could a Citrix Engineer configure to shorten the launch time of subsequent applications?

Options:

A.

Session lingering

B.

Session Reliability

C.

Connection leasing

D.

Citrix Profile Manager

Question 5

Scenario: A Citrix Engineer set Desktop Composition Redirection to 'Enabled' in a policy within Citrix Studio and filtered the policy by virtual desktops. Desktop Composition Redirection is set to 'Disabled' in a group policy object (GPO) applied to the organizational unit (OU) containing all virtual desktops.

What will be the resultant effect of these two policies on the virtual desktops they are applied to?

Options:

A.

The two policies will cancel each other out, leaving the desktops with the default settings.

B.

The policy assigned to the OU will take precedence and Desktop Composition Redirection will be disabled.

C.

The Unfiltered policy will take precedence over the conflicting policies, leaving the desktops with the default settings.

D.

The policy assigned in Citrix Studio will apply as it takes precedence over OU policies and Desktop Composition Redirection is enabled.

Question 6

Which two Windows components can be selected using the Provisioning Services Device Optimization Tool? (Choose two.)

Options:

A.

Search

B.

Firewall

C.

SuperFetch

D.

Screen Saver

E.

TCP/IP Offload

Question 7

A Personal vDisk can be __________ and ____________. (Choose the two correct phrases to complete the sentence.)

Options:

A.

used with servers and desktops

B.

placed on a different storage than the write cache

C.

used for application installations only and NOT drivers

D.

used with a third-party user profile management solution

E.

used with Provisioning Services to stream to physical and virtual machines

Question 8

Which two items are required when creating a machine catalog for Desktop OS machines using Machine Creation Services? (Choose two.)

Options:

A.

Bootstrap file

B.

Master image

C.

Target device

D.

Remote access policy

E.

Account naming convention

Question 9

Scenario: Provisioning Services has been installed to facilitate the deployment of server OS and desktop OS machines. Currently, a pool of Windows 8 desktop OS machines is being used by the Imaging and Radiology team. A virtual machine OU named CCH Virtual Desktops has been created. However, users on the Imaging and Radiology team need to use their medical imaging applications that CANNOT be installed on their workstations due to insufficient resources.

As the Citrix Engineer, you have been asked to provision desktop OS machines with sufficient resources to three Imaging and Radiology team members in order to allow them to use their new applications. All three of the desktop OS machines should be assigned the Win8 vDisk, and the desktop OS machines should maintain changes after reboot. Members of the Imaging and Radiology team need to be able to log into the CCH.com domain.

The Windows 8 virtual machines were already created with the following information:

  • CCHWin801 - IR Desktop 1

CCHWin802 - IR Desktop 2

  • IP Address: DHCP Assigned
  • MAC Address: 56:5b:b0:38:6a:54
  • NOT a member of Active Directory

CCHWin803 - IR Desktop 3

  • IP Address: DHCP Assigned
  • MAC Address: be:c8:96:6e:89:c9
  • NOT a member of Active Directory

In order to save time, a copy of an existing Window 8 base image vDisk was created and named Win8 and is stored in the PVS StoreOI store.

As the Citrix Engineer, use the existing site, store, and device collection to implement the tasks below.

Tasks:

1. Create and configure all 3 of the Windows 8 desktop OS machines as target devices to boot using the Win8 vDisk.

2. Name the target devices CCHWin801, CCHWin802, and CCHWin803.

3. Modify the vDisk as necessary to meet the requirements outlined in the scenario.

Options:

Question 10

Scenario: Provisioning Services has been installed to facilitate the deployment of Windows 8 desktops and web servers. A Citrix Engineer is instructed to provision web servers using the Web_Server vDisk. The engineer needs to create a target device and add the device to Active Directory.

The following pieces of information have been provided:

  • Server name: CCHWebServer
  • IP address: 192.168.10.115
  • MAC address: fa:49:fd:63:7b:be

The machine account password for the new server in Active Directory needs to be changed every seven days. As the Citrix Engineer, use the existing site, store, and device collection to implement the tasks below.

Tasks:

1. Create a target device named CCHWebServer.

2. Assign the Web_Server vDisk to the newly created target device.

3. Enable AD account password management on the vDisk.

4. Enable automatic password support in the properties of the current server.

5. Create a machine account in AD for the target device and place the machine account in the Web Server OU.

Options:

Question 11

Scenario: A Citrix Engineer at CCH needs to provide Help Desk administrators with delegated administrative rights without impacting site functionality.

Help Desk administrators need permissions to do the following:

  • Perform any tasks within Citrix Director
  • Perform power operations on Windows Desktop machines
  • Add and remove machines and applications from Maintenance Mode
  • View Site Logs
  • View Machine Catalogs
  • View Policies

Permissions should be specifically granted to the CCH\HelpDeskAdmins group. Tasks:

1. Create a custom role for Help Desk administrators.

2. Assign only the required permissions to the newly created role.

3. Assign the newly created role to the CCH\HelpDeskAdmins group.

Options:

Question 12

Scenario: A Citrix Engineer must provide students in the Cardiology program at CCH with Windows 8 virtual desktops. These students will use hosted applications through Receiver. Personalization of the Windows 8 virtual desktops is NOT required.

Tasks:

1. Create the appropriate machine catalog and name it XD_POOLED 1.

2. Create 10 virtual desktops for students in the Cardiology program.

3. Ensure each virtual desktop is assigned 2 Virtual CPUs.

4. Set the memory size for the virtual desktops to 8 GB.

5. Use the Network 0 network interface card.

6. Create Active Directory computer accounts for the virtual desktops in the CCH Virtual Desktops organizational unit (OU).

7. Use the following account naming scheme for the virtual desktops: TrainingDesk001 – TrainingDesk010.

8. Create the virtual desktops from the WDK_8_1 master image.

9. Create the appropriate Delivery Group named CCH_Training_Desktops, and configure it according to the requirements above. Students in the Cardiology program are members of the Training Desktops user group.

Options:

Question 13

Scenario: A Citrix Engineer implemented applications and desktops based on department (Accounts, Sales and Management) and operating systems (Windows 7 and Windows 8). The engineer created five scopes, one for each department and one for each operating system. The engineer gave an administrator the Help Desk Administrator role for the Accounts scope and the Machine Catalog Administrator role for the Windows 7 scope.

As a result, the administrator will be able to __________ and __________. (Choose the two correct phrases to complete the sentence.)

Options:

A.

create new Windows 7 machines in any department scope

B.

create new Windows 8 machines as long as they are in Accounts scope

C.

perform session management of Windows 8 machines in Accounts scope

D.

perform session management of Windows 7 machines only in Accounts scope

Question 14

A Citrix Engineer needs to add more Delivery Controllers to a site in which the auto-update feature is disabled.

What would the engineer need to do in order for the Virtual Delivery Agents (VDAs) to communicate with the new Delivery Controllers?

Options:

A.

Restart the Citrix Desktop Service.

B.

Restart the new Delivery Controllers.

C.

Run a SQL query and update the site database.

D.

Update the ListOfDDCs registry key for all VDAs.

Question 15

Scenario: A XenDesktop deployment with 200 virtual desktops has a host connection to a single XenServer pool configured for thin provisioning. A Citrix Engineer has been instructed to implement IntelliCache.

Which steps must the engineer take to meet the requirements stated in the scenario?

Options:

A.

Modify the existing host connection and enable IntelliCache.

B.

Create a new resource using the existing host connection and enable IntelliCache.

C.

Delete the existing resource, create a new one with the same name and enable IntelliCache.

D.

Delete the existing host connection, create a new connection to the same pool and enable IntelliCache.

Question 16

Scenario: A Citrix Engineer needs to deploy Citrix Receiver using a custom Client Name value. The engineer uses the install command CitrixReceiver /CLIENT_NAME=Terminal. A user later renames the computer and the custom client name is lost.

Which additional install parameter could the engineer have used to prevent the custom client name from being lost?

Options:

A.

SELFSERVICEMODE=FALSE

B.

ALLOW_CLIENTHOSTEDAPPSURL

C.

CLIENT_NAME=%COMPUTERNAME%

D.

ENABLE_DYNAMIC_CLIENT_NAME=NO

Page: 1 / 4
Total 112 questions