Weekend Sale 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: save70

Free and Premium Cisco 350-801 Dumps Questions Answers

Page: 1 / 27
Total 361 questions

Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) Questions and Answers

Question 1

An administrator would like to set several Cisco Jabber configuration parameters to only apply to mobile clients (iOS and Android). How does the administrator accomplish this with Cisco Jabber 12.9 and Cisco UCM 12.5?

Options:

A.

Assign the desired configuration file to "Mobile" Jabber Client Configuration in the Service Profile.

B.

Upload the jabber-config.enc file to TFTP

C.

Create a user profile in Jabber Policies.

D.

Deploy jabber-config-user.xml on iOS and Android devices.

Buy Now
Question 2

What happens when a Cisco IP phone loses connectivity to the duster during an active call?

Options:

A.

The call continues to be active, but features like transfer or hold do not work.

B.

The call continues and all features work.

C.

The call drops immediately.

D.

The call drops after missing two keepalives from Cisco UCM.

Question 3

What requires a Cisco IOS XE transcoder?

Options:

A.

DTMF conversion

B.

SIP early offer

C.

transrating

D.

call queuing

Question 4

Refer to the exhibit. An administrator must fix the SRV records to ensure that server1. sample.com is always contacted first from the three servers. Which solution should the engineer apply to resolve this issue?

Options:

A.

Priority = 100, Weight = 90

B.

Priority = 10, Weight = 5

C.

Priority = 10, Weight = 10

D.

Priority = 5, Weight = 70

Question 5

Refer to the exhibit.

What causes the PRI issue?

Options:

A.

The controller shut down

B.

The cable is unplugged

C.

The framing is configured incorrectly

D.

The clock source is incorrect.

Question 6

How is bandwidth allocated to traffic flows in a flow-based WFQ solution?

Options:

A.

All the bandwidth is divided based on the QoS marking of the packets.

B.

Each type of traffic flow has equal bandwidth.

C.

Bandwidth is divided among traffic flows. Voice has priority.

D.

Voice has priority and the other types of traffic share the remaining bandwidth.

Question 7

In which location does an administrator look to determine which subscriber the phone registers to if loses registration with the current Cisco UCM subscriber?

Options:

A.

On Cisco UCM Administration Page Device > Phone > Phone Configuration page

B.

On Cisco UCM Administrator Page server > Cisco UCM

C.

On Cisco UCM Administrator page system > Device Pool > Cisco UCM group

D.

On Cisco UCM Administrator page system > Enterprise Parameters

Question 8

A Cisco UCM administrator sets up new route patterns to support phones in tour different locations, all with local gateways. The administrator wants to use the same route pattern for all four locations. How must the system be configured to achieve this goal?

Options:

A.

Use CSS alternate routing rules.

B.

Use standard local route groups.

C.

Add a CSS to each local gateway.

D.

Use transforms in the route groups.

Question 9

An engineer is deploying the Webex app on a Microsoft Windows computer that has multiple user accounts. Which CLI argument allows the engineer to Install the application as a "per machine" Installation?

Options:

A.

ACCEPT_EULA

B.

INSTALL ROOT

C.

ALLUSERS

D.

FORCELOCKDOVN

Question 10

User A Calls user. The call gets connected, but the quality is bed. What are two reasons for this issue? (Choose two)

Options:

A.

Incorrect partition

B.

No region relationship

C.

Network congestion

D.

Incorrect QoS

E.

Incompatible codec

Question 11

What will Differserv provide?

Options:

A.

traffic classification

B.

scheduling technique

C.

service differentiation

D.

queuing mechanism

Question 12

Refer to tho exhibit. A customer reports that SIP voice calls are using G.711 codec instead of G.729. The administrator checks the SIP signaling in the logs and sees the SDP shown. What will the administrator see in the logs if the right configuration change was made to resolve the issue?

Options:

A.

m=audio 16444 RTP/AVP 4 101

B.

m=audio 16444 RTP/AVP 15 101

C.

m=audio 16444 RTP/AVP 9 101

D.

m=audio 16444 RTP/AVP 18 101

Question 13

Refer to the exhibit. A user takes a phone from San Francisco to New York for a short reassignment. The phone was set up to use the San Francisco device pool, and device mobility is enabled on the Cisco UCM. The user makes a call that matches a route pattern in a route list that contains the Standard Local Route Group. To where does the call retreat?

Options:

A.

The call fails because device mobility is turned on, and the phone is not configured in New York. The engineer must configure which sites the device should be roaming to.

B.

The call egresses in San Francisco because the user uses device mobility and is allowed to roam while still keeping the number and resources assigned in San Francisco.

C.

The call fails because the Standard Local Route Group is being used only it no configuration is set for the device pools.

D.

The call egresses in New York because the device automatically is assigned a New York device pool and uses the local gateway.

Question 14

Refer to the exhibit. What is the registration state of the analog port in this debug output?

Options:

A.

The analog port failed to register to Cisco UCM with an error code 200.

B.

The MGCP Gateway is not communicating with the Cisco UCM.

C.

The analog port is currently shut down.

D.

The analog port is registered to Cisco UCM.

Question 15

In Cisco UCM, an engineer must create a new SIP route pattern to allow ccnp.cisco com for all internal callers The internal callers have a calling search space named CSSJNTERNAL that includes the partition named PTJNTERNAL If allowed, the calls must be routed to a SIP trunk named SIP_CISCO_TRK. Drag and drop the values from the left onto the corresponding fields on the right.

Options:

Question 16

An administrator installs a new Cisco TelePresence video endpoint and receives this error:"AOR is not permitted by Allow/Deny list. Which action should be taken to resolve this problem?

Options:

A.

Reboot the VCS server and attempt reregistration.

B.

Change the SIP trunk configuration.

C.

Correct the restriction policy settings.

D.

Upload a new policy in VCS.

Question 17

What happens to voice packets from a Cisco 8845 IP phone in the QoS trust boundary?

Options:

A.

The voice packets are not trusted, and the access layer switch reclassifies the packets.

B.

The voice packets are classified by the phone, and the classification is accepted

C.

The voice and access layer switch negotiate the classification of packets

D.

Cisco UCM determines how the voice packers are classified.

Question 18

Refer to the exhibit. An engineer is troubleshooting why PSTN phones are not receiving the caller's name when called from a remote Cisco UCM site. An ISDN PRI connection is being used to reach the PSTN What must the administrator select to resolve the issue?

Options:

A.

isdn supp-service name calling

B.

isdn outgoing display-ie

C.

isdn enable did

D.

isdn send display le

Question 19

Refer to the exhibit. A customer wants the SIP 200 OK shown to advertise codecs in the following order:

After correcting the codec preferences. What should the audio payload show in the SIP Traces?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Question 20

What is an indicator of network congestion in VoIP communications?

Options:

A.

jitter increase due to variable delay

B.

discards in the interface of routers and switches

C.

video loss due to video frame corruption

D.

gaps in the voice due to packet loss

Question 21

What is a benefit of Easy/QoS?

Options:

A.

It configures QoS on the network.

B.

It provisons QoS for Layer 3 devices automatically.

C.

It expresses business relevance for applications.

D.

It allows single command QoS deployment.

Question 22

Which configuration on Cisco UCM is required for SIP MWl to work?

Options:

A.

Assign an MWl extension on the mailbox.

B.

The line partition must be inside the inbound CSS assigned to the CUC SIP trunk.

C.

The line partition must be inside the rerouting CSS assigned to the Cisco Unity Connection SIP trunk.

D.

Set the"Enable message waiting indicator" on the port group.

Question 23

Which two protocols can be configured for the Cisco Unity Connection and Cisco UCM integration? (Choose two.)

Options:

A.

H. 323

B.

SIP

C.

SCCP

D.

MGCP

E.

RTP

Question 24

An administrator troubleshoots a DNS issue with Cisco UCM and observes that the hostname resolution returns the wrong IP address The DNS team Informs the administrator that the A'AAA record was recently updated on the DNS server Which action must be taken on Cisco UCM to reflect the correct entries?

Options:

A.

Flush the current cache using this CLl command admin utils network name-service hosts cache Invalidate

B.

Delete me arp entry of the host utils network arp delete

C.

Flush the current cache vising this CLl command admin:utils network name-service hosts cache validate

D.

Restart the DNS server to Hush any stale entries

Question 25

What is the purpose of Mobile and Remote Access (MRA) in the Cisco UCM architecture?

Options:

A.

MRA is used to access Webex cloud services only if authenticated with on-premises LDAP service.

B.

MRA is used to make secure PSTN calls by Cisco UCM only while on-premises authentication.

C.

MRA is used to make B2B calls through Expressway registration.

D.

MRA is used to access the collaboration services offered by Cisco UCM from off-premises network connections

Question 26

Which settings are needed to configure the SIP route pattern in Cisco Unified Communications Manager?

Options:

A.

Pattern usage, IPv4 pattern, IPv6 pattern, and description

B.

Pattern usage, IPv4 pattern, and SIP trunk/Route list

C.

Pattern usage, IPv6 pattern, and SIP trunk/Route list

D.

SIP trunk/Route list, description, and IPv4 pattern

Question 27

Exhibit.

Refer the exhibit. A collaboration engineer needs to replace the original, single NTP

server that was configured during the inital install of a Cisco UCM server. What is the first

step to accomplish this task?

Options:

A.

Restart the NTP service on Cisco UCM

B.

Delete the original NTP server from Cisco UCM

C.

Stop the NTP service on Cisco UCM

D.

Enable NTP authentication for the new NTP server on Cisco UCM

Question 28

Refer to the exhibit. Which route pattern can the Cisco UCM administrator apply to the configuration to allow calls to "1306.1316.1326,13*6.13#6” only?

Options:

A.

13XX

B.

13[25-8]6

C.

13!#

D.

13[A3-9)6

Question 29

The chief technology officer at a company must onboard devices to the cloud A workspace is created in Cisco Webex Control Hub for every device. What must be generated to complete the on boarding process?

Options:

A.

16-digit activation code to share with all the devices

B.

16-digit activation code for each devices

C.

15-digit activation code for each devices

D.

15-digit activation code to share with at all devices

Question 30

Refer to the exhibit. This INVITE is sent to an endpoint that only supports G.729. What must be done for this call to succeed?

Options:

A.

Add a transcoder that supports G.711ulaw and G.729.

B.

Nothing; both sides support G.729.

C.

Add a media termination point that supports G.711ulaw and G.729.

D.

Nothing both sides support payload type 101.

Question 31

A Cisco voice gateway is configured to use a sip-kpml DTMF relay in global settings. A new SIP dial peer is configured for a third-party application that only supports an in-band DTMF relay. Which commands must an engineer run on the dial peer?

Options:

A.

dtmf-relay sip-info

B.

dtmf-relay sip-notify

C.

dtmf-relay rtp-net

D.

no dtmf-relay sip-kpml

Question 32

What is the function of the Cisco Unity Connection Call Handler?

Options:

A.

routes calls to a user based on caller input

B.

queues calls

C.

allows customized scripts for IVR capabilities

D.

searches a list of extensions until the call is answered

Question 33

A Cisco IP Phone 7841 that is registered to a Cisco Unified Communications Manager with default configuration receives a call setup message. Which codec is negotiated when the SDP offer includes this line of text?

M=audio 498181 RTP/AVP 0 8 97

Options:

A.

G.711ulaw

B.

iLBC

C.

G.711alaw

D.

G.722

Question 34

What is a benefit of using DNS in a Cisco collaboration infrastructure?

Options:

A.

provides high availability for the collaboration infrastructure

B.

provides certificate-based security

C.

reduces latency for audio and video communications

D.

enables the directory address book in Cisco UCM

Question 35

What are the last two bits of a DS field in DiffServe Byte used for?

Options:

A.

INC

B.

AFxy

C.

ECN

D.

RMI

Question 36

An administrator is configuring a new Cisco UCM with PSTN capabilities. Due to

bandwidth constraints, audio compression is used on the codec. DTMF must work as

expected because the customer is calling many call centers where the users must select

options in the call. Where is DTMF out-of-band in a CCM 12.5 with SIP-based gateway

configured?

Options:

A.

in the DTMF setting under SIP profile on the Cisco Unified Border Element

B.

in the dial peer on the Cisco IOS router

C.

in regions on the Cisco UCM where the appropriate codec to use is set

D.

in DTMF settings in the audio codec preference list under regions in the Cisco UCM

Question 37

Refer to the exhibit.

An administrator configures a secure SIP trunk on Cisco UCM.

Which value is needed in the secure certificate subject or subject alternate name field to accomplish this task?

Options:

A.

The fully qualified domain name of the remote device that is configured on the SIP

trunk.

B.

The common name of the Cisco UCM CallManager certificate.

C.

The full qualified domain name of all Cisco UCM nodes that run the CallManager

service.

D.

The common name of the remote device certificates.

Question 38

Which two DNS records must be created to configure Service Discovery for on-premises Jabber? (Choose two.)

Options:

A.

_cisco-uds._tls.cisco.com pointing to the IP address of Cisco UCM

B.

_cuplogin_tcp.cisco.com pointing to a record of IM and Presence

C.

_cuplogin._tls.cisco.com pointing to the IP address of IM and Presence

D.

_cisco-uds.tcp.cisco.com pointing to a record of Cisco UCM

E.

_xmpp.tls.cisco.com pointing to a record of IM and Presence

Question 39

An administrator must implement toll fraud prevention on Cisco UCM using these parameters:

• Enable Forced Authorization Code 112211.

• Set an authorization level of 3 for the route pattern 8005551212.

• Require no access code to dial 10-digit numbers.

How must the route pattern be implemented?

Options:

A.

Pattern = 1122113.8005551212

B.

Pattern = 8005551212.1122113

C.

Pattern = 8005xxxxxx

D.

Pattern = 3.800xxxxxxx

Question 40

An engineer troubleshoots a Cisco Jabber login problem on a Windows PC. The login fails with the error message "Cannot find your services automatically. Click advanced settings to set up manually " Which action should the engineer take first?

Options:

A.

Verify whether the cup-xmpp certificates are valid.

B.

Verify the username and password and try again.

C.

Perform a manual DNS lookup of SRV record _cisco-uds._tcp.domain.com.

D.

Perform a manual DNS lookup of SRV record _collab-edge._tls.domain.com.

Question 41

How are network devices monitored in a collaboration network?

Options:

A.

The Cisco Discovery Protocol table is shared among devices.

B.

Ping Sweep reports "unmanaged' state devices.

C.

System logs are collected in a Cisco Prime Collaboration Server.

D.

Simple Network Managed Protocol is enabled on each device to poll specific values periodically.

Question 42

Refer to the exhibit. A collaboration engineer configures Cisco UCM to act as a DHCP server. What must be done next to configure the DHCP server?

Options:

A.

Restart the Cisco DHCP Monitor Service under Cisco Unified Serviceability

B.

Add the new DHCP server to the primary DNS server

C.

Restart the TFTP service under Cisco Unified Serviceability.

D.

Add a DHCP subnet to the DHCP server under Cisco UCM Administration.

Question 43

Refer to the exhibit. An administrator must replace the T1 card with an E1 card. What is the correct configuration if the administrator was asked to configure 12 time slots?

Options:

A.

B.

C.

D.

Question 44

An engineer is trying to add a new subscriber to the cluster of Cisco UCM. and the synchronization is failing. The engineer obtained the output from the publisher and noticed the error Based on the output, what is the issue?

Options:

A.

The NTP server is running out of space in the hard drive, which prevents the cluster service from starting.

B.

The NTP service is pointing to the wrong publisher.

C.

The NTP server for Cisco UCM must be stratum 6 or higher.

D.

The NTP server must be replaced by another server with NTP stratum 1, 2, or 3 running version NTPv4.

Question 45

What is the maximum one-way packet loss and jitter for voice before quality issues arise?

Options:

A.

< 10 percent packet loss and < 10 ms jitter

B.

< 1 percent packet loss and < 30 ms jitter

C.

< 9 percent packet loss and < 30 ms jitter

D.

< 3 percent packet loss and < 60 ms jitter

Question 46

Which command enables SIP OAuth mode on a Cisco UCM publisher node?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Question 47

An engineer deploys a Cisco Expressway-E server for a customer who wants to utilize all features on the server. Which feature does the engineer configure on the Expressway-E?

Options:

A.

H.323 endpoint registrations

B.

Mobile and Remote Access

C.

SIP gateway for PSTN providers

D.

VTC bridge

Question 48

What are two features of Cisco Expressway that the customer gets if Expressway-C and Expressway-E are deployed?(Choose two.)

Options:

A.

highly secure real-traversal technology to extend organizational reach.

B.

additional visibility of the edge traffic in an organization.

C.

complete endpoint registration and monitoring capabilities for devices that are local and remote.

D.

session-based access to comprehensive collaboration for remote workers, without the need for a separate VPN client.

E.

utilization and adoption metrics of all remotely connected devices.

Question 49

Which Cisco Unity Connection call management element can be used to answer calls, provide callers with a list of menu options, and transfer calls?

Options:

A.

directory handler

B.

call routing table

C.

interview handler

D.

call handler

Question 50

A high-speed network is often configured with a five-class QoS model. Which classes are

used in the model?

Options:

A.

real-time, call-signaling, critical data, best-effort, and scavenger

B.

real-time, signaling, critical data, best-effort and drop-class

C.

call-signaling, real-time, critical data, best-effort, and drop-class

D.

voice, video, signaling, critical data, and best-effort

Question 51

Where is Directory Connector hosted in a Cisco Webex Hybrid Services deployment?

Options:

A.

on a server in the Webex Data Center

B.

on a dedicated on-premises server

C.

on a Cisco Expressway-C connector host server

D.

on an on-premises Microsoft Active Directory server

Question 52

Cisco Prime Collaboration Manager is using Cisco Discovery Protocol to discover devices in an automated setup. What must be used to get alerts and faults via traps from devices at regular polling intervals?

Options:

A.

HTTPS

B.

CDP

C.

SNMP

D.

XML

Question 53

An engineer is configuring a phone system CISCO UCM and wants to activate TFTP service. The engineer selects the serviceability page for configuration. Which nodes configurable for TFTP?

Options:

A.

any two nodes

B.

any node

C.

only nodes that have Cisco UCM service enabled

D.

any subscriber nodes

Question 54

An end user at a remote site is trying to initiate an Ad Hoc conference call to an end user at the main site. The conference bridge is configured to support G.711. The remote user's phone only supports G.729. The remote end user receives an error message on the phone: "Cannot Complete Conference Call." What is the cause of the issue?

Options:

A.

The remote phone does not have the conference feature assigned.

B.

A software conference bridge is not assigned.

C.

A Media Termination Point is missing.

D.

The transcoder resource is missing.

Question 55

For Webex Calling, how are outbound transfers and forwards restricted for a particular call type?

Options:

A.

together on an organization-by-organization basis

B.

together on a site-by-site basis

C.

independently on an organization-by-organization basis

D.

independently on a site-by-site basis

Question 56

A Cisco Telepresence SX80 suddenly has issues displaying main video to a display over HDMI. Which command can you use from the SX80 admin CLI to check the video output status to the monitor?

Options:

A.

xStatus HDMI Output

B.

xStatus video Output

C.

xconfiguration video Output

D.

xcommand video status

Question 57

What are two common attributes of XMPP XML stanzas? (Choase two.)

Options:

A.

from

B.

to

C.

destination

D.

version

E.

Source

Question 58

An engineer must configure a SIP integration between cisco UCM and cisco Unity Connection. These components are configured already:

Drag and drop the components from the left into the order they must be configured on the right.

Options:

Question 59

An engineer configures local roule group names to simplify a dial plan. Where does the engineer set the route groups according to the local route group names that are configured?

Options:

A.

route list

B.

device pool

C.

CSS

D.

route pattern

Question 60

Refer to the exhibit.

Which Codec is negotiated?

Options:

A.

G.729

B.

ILBC

C.

G.711ulaw

D.

G.728

Question 61

Refer to the exhibit. A collaboration engineer adds an analog gateway to a Cisco UCM cluster. The engineer chooses MGCP over SCCP as the gateway protocol. Which two actions ensure that the gateway registers? (Choose two.)

Options:

A.

Enter "no seep" on the gateway in configuration mode.

B.

Enter "ccm-manager mgcp" on the gateway in configuration mode.

C.

Enter "mgcp" on the gateway in configuration mode.

D.

Enter "ccm-manager config" on the gateway in configuration mode.

E.

Delete and re-add the gateway configuration in Cisco UCM.

Question 62

Which two steps should be taken to provision a phone after the Self-Provisioning feature was configured for end users? (Choose two.)

Options:

A.

Ask the Cisco UCM administrator to associate the phone to an end user.

B.

Plug the phone into the network.

C.

Dial the hunt pilot extension and associate the phone to an end user

D.

Dial the self-provisioning IVR extension and associate the phone to an end user.

E.

Enter settings menu on the phone and press * ,*,# (star, star, pound).

Question 63

Which value should be changed when each Cisco UCM node does not allow for more than 5000 phones to be registered?

Options:

A.

Maximum Number of Registered and Unregistered Devices service parameter on each node

B.

Minimum Number of Phones service parameter on each node

C.

Maximum Number of Registered Devices service parameter on each node

D.

Maximum Number of Phones service parameter on the Publisher

Question 64

SIP proxies have operations defined in RFC 3261 and supporting extensions. Though no lETF RFC completely defines how SBCs must function. SBCs evolved over the years.

Which two operations demonstrate the high-level differences between SBCs and SIP proxies? (Choose two.)

Options:

A.

Stateful proxies are context-aware and can terminate communication sessions by themselves

B.

SlP proxies add a Via header and optionally a Record-Route header, and the rest of the headers are left untouched

C.

SBCs can modify headers such as To, From, Contact, and Call-D.lt can introduce new headers into the SIP message

D.

SBCs are capable of interworking completely different protocols to set up, modify, and tear down communication sessions. It includes SIP, H.323,and MGCP protocols

E.

SIP proxies are SDP-aware and can change the SDP bodies

Question 65

What is the maximum number of servers that are in an IM and Presence presence redundancy group?

Options:

A.

10

B.

6

C.

2

D.

4

Question 66

What are two reasons that AF41 is marked for the audio and video channels of a video call? (Choose two.)

Options:

A.

to prioritize video over other high -priority traffic classes

B.

to give video calls a higher priority than AP41 in the QoS policy

C.

to allow high-definition quality calls over low-speed links

D.

to preserve lip synchronization between the audio and video channels

E.

to provide separate classes for audio calls and video calls

Question 67

An engineer roust configure DTMF relay on a Cisco Unified Border Element by using RFC2833 as the preferred relay mechanism and KPML as the

next preferred relay mechanism. The engineer logs in to the CUBE and enters the dial-peer configuration level. Which command should be run at

dial-peer configuration level?

Options:

A.

dtmf-relay sip-kvmi rtp-nte

B.

dtmf- relay rtp-nte sip-kpml

C.

dtmf-relay sip-kgml rtp-inband

D.

dtmf-relay rtp-inband sip-kvmi

Question 68

An engineer is troubleshooting a Primary Rate Interface that fails to come up on a H.323 production voice gateway. Layer 1 and Layer 2 configurations were validated successfully Which Cisco IOS command must be run to debug the issue with the least impact on network performance?

Options:

A.

debug vtsp session

B.

debug ccsip messages

C.

debug all

D.

debug isdn q931

Question 69

An engineer must configure a new Cisco UCM translation pattern to convert 915555555555 into 1665 Which translation pattern must be used?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Question 70

Refer to the exhibit. What is the reason for this call failure?

Options:

A.

The device pool contains more call processing agents in the CMG group than tie endpoint can support

B.

MRGL contains more media groups than the endpoint can support.

C.

The hunt group contains more devices than the endpoint can support

D.

The available location bandwidth between sites is exceeded

Question 71

An engineer with troubleshoots poor voice quality on multiple calls. After looking at packet captures, the engineer notices high levels of jitter. Which two areas does the engineer check to prevent jitter? (Choose two.)

Options:

A.

Voice packets are classified and marked

B.

All devices use wired connections instead of wireless connections

C.

The network meets bandwidth requirements

D.

Cisco UBE manages voice traffic, not data traffic

E.

MTP is enable on the sip trunk to cisco Unified Border Elemnet

Question 72

An engineer is notified that the Cisco TelePresence MX800 that is registered in Cisco Unified communications Manager shows an empty panel, and the Touch 10 shows a corresponding icon with no action when pressed. Where does the engineer go to remove the inactive custom panel?

Options:

A.

The phone configuration page in CUCM Administration

B.

The SIP Trunk security profile page in CUCM Administration

C.

The software Upgrades page in CUCM OS Administration

D.

The In-Room control Editor on the webpage of the MX800

Question 73

Refer to the exhibit.

An engineer must modify the existing QoS policy-map statement to implement LLQ for voice traffic. Which change must the engineer make in the configuration?

Options:

A.

bandwidth 170 to reserve 170

B.

bandwidth 170 to LL1 170

C.

bandwidth 170 to priority 170

D.

bandwidth 170 to percent 170

Question 74

An administrator executes the debug isdn q931 command while debugging a failed call. After a test call is placed, the logs return a disconnect cause code of 1. What is the cause of this problem?

Options:

A.

The media resource is unavailable.

B.

The destination number rejects the call.

C.

The destination number is busy.

D.

The dialed number is not assigned to an endpoint.

Question 75

Refer to the exhibit There is a call flow between Phone A and Phone B Phone B (holder) places Phone A (holder) on hold Which MRGL and Audio Source are played to Phone A?

Options:

A.

MRGL A and Audio Source 4

B.

MRGL B and Audio Source 4

C.

MRGL A and Audio Source 2

D.

MRGL B and Audio Source 2

Question 76

An administrator is asked to implement toll fraud prevention in Cisco UCM, specifically to restrict off-net to off-net call transfers. How is this implemented?

Options:

A.

Enforce ad-hoc conference restrictions.

B.

Set the appropriate service parameter.

C.

Implement time-of-day routing.

D.

Use the correct route filters.

Question 77

An administrator works with an ISDN PRI that is connected to a third-party PBX. The ISDN link does not come up. and the administrator finds that the third-party PBX uses the OSIG signaling method. Which command enables the Cisco IOS Gateway to use QSIG signaling on the ISDN link?

Options:

A.

isdn incoming-voice voice

B.

isdn switch-type basic-ni

C.

isdn switch-type basic-qsig

D.

isdn switch-type primary-qsig

Question 78

An engineer must deploy the Cisco Webex app to a shared Windows Virtual Desktop Infrastructure environment in the C:\Program Files folder. Which command line argument must be run when running the installer?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Question 79

A network administrator deleted a user from the LDAP directory of a company. The end user shows as Inactive LDAP Synchronized User in Cisco UCM. Which step is next to remove this user from Cisco UCM?

Options:

A.

Delete the user directly from Cisco UCM.

B.

Wait 24 hours for the garbage collector to remove the user.

C.

Restart the Dirsync service after the user is deleted from LDAP directory.

D.

Execute a manual sync to refresh the local database and delete the end user.

Question 80

A collaboration engineer inherits the responsibilities of another engineer. The previous engineer implemented a SIP integration between Cisco Unity Connection and Cisco UCM. Users can leave messages, but the Message Waiting Indicator is unconfigured. Which two actions must the engineer perform to enable MWI? (Choose two.)

Options:

A.

From Cisco UCM, select Advanced Features, select Voice Mail, select Message Waiting, and configure the message waiting numbers.

B.

From Cisco UCM. open the SIP Trunk Security Profile Information menu and select Accept Unsolicited Notification.

C.

From Message Waiting Indicator Settings in Unity Connection, enable MWI for each user.

D.

From Port Group in Unity Connection, select Enable Message Waiting Indicators.

E.

From Message Waiting Indicators in Unity Connection, select Send Message Counts

Question 81

Refer to the exhibit. An administrator is asked to allow new phones to use self-provisioning Interactive Voice Response. Which change to the Universal Device Template implements this feature?

Options:

A.

Configure Idle URL with default.

B.

Configure Authentication Server URL to the authentication server.

C.

Configure the Directory URL to a valid directory.

D.

Configure Secure Information URL to info URL.

Question 82

An employee of company ABC just quit. The IT administrator deleted the employee’s user id from the active directory at 10 a m. on March 4th The nightly sync occurs at 10 p.m. daily. The IT administrator wants to troubleshoot and find a way to delete the user id as soon as possible How is this issue resolved?

Options:

A.

Wart until 10 pm on March 4th when the user is automatically removed from Cisco UCM.

B.

Wait until 10 pm on March 5th when the user is automatically removed from Cisco UCM.

C.

Wait until 3 15 a.m. on March 6th for garbage collection to remove the user from Cisco UCM.

D.

Wait until 315am on March 5th for garbage collection to remove the user from Cisco UCM.

Question 83

What is the function of DiffServ?

Options:

A.

It automatically identifies traffic

B.

It provides reserve bandwidth by using RSVP

C.

It categorizes traffic.

D.

It guarantees end-to-end bandwidth for traffic.

Question 84

Where would an administrator assign the system shadow location for implementing intercluster enhanced locations CAC in Cisco UCM?

Options:

A.

nongatekeeper-controlled intercluster trunk

B.

SIP intercluster trunk

C.

H.225 trunk

D.

gatekeeper-controlled inter cluster trunk

Question 85

An engineer builds the configuration on a Cisco IOS gateway for the dial-peers:

Which command is required to complete the configuration?

Options:

A.

Codec g726r32

B.

Codec g729cr81

C.

Codec g723ar63

D.

Codec g711ulaw

Question 86

Refer to the exhibit. Cisco Unified element is attempting to establish a call with Subcribers1, but the call fails. Cisco Unified Border Element then retries the same call with Subcribers2, and the call proceeds normally.

Which action resolves the issue?

Options:

A.

Verify that the correct calling search space is selected for the inbound Calls section

B.

Verify that the run on all active United CM Nodes checkbox is enabled

C.

Verify that the Significant Digits field for inbound Calls is set to All.

D.

Verify that the PSTN Access checkbox is enabled.

Question 87

Refer to the exhibit. Which codec should an engineer select for a call mode between “Dallas- REG” & “Austin-REG”?

Options:

A.

MP4A-LATM

B.

G.729

C.

OPUS

D.

G.711

Question 88

Where in Cisco UCM is restrictions on audio bandwidth configured?

Options:

A.

location

B.

partition

C.

region

D.

serviceability

Question 89

What are two key features of the Expressway series? (Choose two.)

Options:

A.

VPN connection toward the internal UC resources

B.

SIP header modification

C.

B2B calls

D.

device registration over the Internet

E.

IP to PSTN call connectivity

Question 90

Which DSCP marking is represented as 101110 in an IP header?

Options:

A.

EF

B.

CS3

C.

AF41

D.

AF31

Question 91

Refer to the exhibit. Endpoint A calls endpoint B. What is the only audio codec that is used for the call?

Options:

A.

G722/8000

B.

Telephone-event/8000

C.

G7221/16000

D.

PCMA/8000

Question 92

According to QoS guidelines, what is the packet loss for streaming video?

Options:

A.

Not more than 8%

B.

Not more than 1%

C.

Not more than 3%

D.

Not more than 5%

Question 93

An administrator must make a pattern to route calls to two different destinations john doe@company com and jane doe@company com Which type of patterns are needed in the Cisco UCM. and what must the pattern look like?

Options:

A.

A SIP route pattern that looks like the *@company.com

B.

A SIP route pattern that looks like this company.com

C.

A regular route pattern with URI feature enable in the configuration page. The pattern

must look like this:(*@company.com)

D.

A regular route pattern with URI feature enable in the configuration page. The pattern

must look like this:MATCH(*@company.com)

Question 94

What are two characteristics of QoS traffic policing? (Choose two.)

Options:

A.

Traffic policing can be applied to outbound traffic on an interface.

B.

Traffic policing can be applied to inbound traffic on an interface.

C.

Traffic policing uses scheduling functions to transmit delayed packets.

D.

When traffic rate equals the configured maximum rate, excess traffic is remarked

E.

Traffic policing queues excess packets.

Question 95

During the Cisco IP Phone registration process the TFTP download fails. What are two reasons for this issue? (Choose two)

Options:

A.

The DNS server was not specified, which is needed to resolve the DHCP server IP address.

B.

Option 100 string was not specified, or an incorrect Option 100 string was specified.

C.

The Cisco IP Phone does not know the IP address of the TFTP server.

D.

The Cisco IP Phone does not know the IP address of any of the Cisco UCM Subscriber nodes.

E.

Option 150 string was not specified, or an incorrect Option 150 string was specified.

Question 96

During the Cisco IP Phone registration process, the TFTP download (ails. What are two reasons (or this issue? (Choose two.)

Options:

A.

The DNS server was not specified, which is needed to resolve the DHCP server IP address.

B.

Option 100 string was not specified, or an incorrect Option 100 string was specified.

C.

The Cisco IP Phone does not know the IP address of the TFTP server.

D.

The Cisco IP Phone does not know the IP address of any of the Cisco UCM Subscriber nodes.

E.

Option 150 string was not specified, or an incorrect Option 150 string was specified.

Question 97

Refer to the exhibit. An engineer configures ISDN on a voice gateway. The provider confirms that the PRI is configured with 10 channels the engineer ordered and is working from the provider side, but the engineer cannot get a B-channel to carry voice. The rest of the configuration for the serial interface and voice network is functioning correctly. Which actions must be taken to carry voice?

Options:

A.

The engineer must activate the controller card on the voice gateway before configuring the device.

B.

The engineer used a T1 interface but must use an E1 interface.

C.

The pri-group timeslots command must be 0-9 for the 10 channels because all values on a router start with 0.

D.

The engineer must manually revert the order of using the channels.

Question 98

An engineer must create a route pattern for a SIP trunk with the pattern named Unity_Con_SIP_Trunk and a voicemail pilot number 8000/< None > in Cisco Unity Connection. Which value must the engineer enter for the Gateway/Route List field?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Question 99

A customer wants to conduct B2B video calls with a partner using on-premises conferencing solution. Which two devices are needed to facilitate this request?

Options:

A.

Expressway-C

B.

Cisco Telepresence Management Suite

C.

Expressway-E

D.

MGCP gateway

E.

Cisco Unified Border Element

Question 100

Which values must be enabled to set up QoS for video conferencing on a VoIP network?

Options:

A.

CS4 and DSCP 32

B.

AP41 and DSCP 34

C.

AF31 and DSCP 34

D.

CS3 and DSCP 24

Question 101

Why is an end user’s PC device not included in a QoS trust boundary?

Options:

A.

The end user could incorrectly tag their traffic to advertise their PC as a default gateway.

B.

The end user may Incorrectly tag their traffic k> be prioritized over other network traffic.

C.

The end user could incorrectly tag their traffic to bypass firewalls.

D.

There is no reason not to include an end user's PC device in a QoS trust boundary.

Question 102

What is the most important consideration when designing a QoS voice framework?

Options:

A.

bandwidth calculations

B.

codec selection

C.

speed propagation

D.

Layer 2 overhead consumption

Question 103

Which wildcard must an engineer configure to match a whole domain in SIP route patterns?

Options:

A.

*

B.

@

C.

!

D.

.

Question 104

What is an advantage of using Cisco Webex Control HuB?

Options:

A.

enables the provisioning, administration, and management of Webex services and Webex Hybrid Services

B.

brings Video, audio, and web communication together to meet the collaboration needs of the modern workplace

C.

provides streamlined communication and collaboration for a hybrid workforce

D.

offers easy contact management, centralized administration, and centralized configuration management

Question 105

An engineer encounters third-party devices that do not support Cisco Discovery Protocol. What must be configured on the network to allow device discovery?

Options:

A.

LLDP

B.

TFTP

C.

LACP

D.

SNMP

Question 106

What is the purpose of Mobile and Remote Access with Cisco Jabber in the cisco UCM?

Options:

A.

to allow Cisco Jabber to register with Cisco UCM without trie use of a VPN from outside the corporate network

B.

to allow Cisco Jabber to register with Cisco UCM via a remote access VPN from a branch office

C.

to allow Cisco Jabber to register with Cisco UCM via a remote access VPN from outside the corporate network

D.

to allow Cisco Jabber to register with Cisco UCM via a site-to-srte VPN from a branch office

Question 107

Refer to the exhibit. An engineer configures a VoIP dial peer on a Cisco gateway. Which codec is used?

Options:

A.

G711alaw

B.

No codec is used (missing codec command)

C.

G.711ulaw

D.

G729r8

Question 108

The chief officer at a company must reduce collaboration infrastructure costs by onbording all on-permises equipment to the cloud by using CISCO Webex Control Hub. Administrators need the ability to manage upgrades and set up hot desking for on-premises devices.

Which action must be taken before on boardng devices by using the Control Hub?

Options:

A.

Configure tie Control Hub organization ID on the devices

B.

Acquire a license for each device.

C.

Allow HTTP traffic from each device to Control Hub.

D.

Upgrade all the devices to software version CE9.15 or later

Page: 1 / 27
Total 361 questions