Newly Released Cisco 350-801 Exam PDF

CSS

device pool

route list

route pattern

The traversal zone on Expressway-c points to Expressway-e through the peer address field on the traversal zone, which specifies the Expressway-e server address. For dual NIC deployments, set the Expressway-e address using an FQDN that resolves the IP address of the internal interface

The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061; HTTPS: TCP 8443; XMPP TCP 5222; media: UDP 36002 to 59999

Do not use a shared address for Expressway-e and Expressway-c, as the firewallcannot distinguish between them. If static NAT for IP addressing on Expressway-e is used, ensure that any NAT operation on expressway-c does not resolve the same traffic IP address. Shared NAT IS not supported

The internal firewall must allow these inbound and outbound connections betweenexpressway - c and Expressway-e :sip;HTTPS(tunneled over SSH between C and E.TCP 2222: TCP 7001: Traversal Media: UDP 2776 to 2777(or 36000 to 36011 for large VM/appliance); XMPP:TCP 7400

Switch# copy running-config startup-config

Switch(config)# no lldp run

Switch# configure terminal

Switch(conlicj)# interface GigabitEthernet1/0/1

Switch(config > # no lldp transmit

Best Effort (DSCP=0)

AF23(DSCP=22)

Expedited ForwafOng (DSCP=U)

AF11 (DSCP=10)