OCPE Category-7A-General-and-Household-Pest-Control Exam With Confidence Using Practice Dumps

To achieve the suggested application rate of0.27 fl. oz. per 1000 sq. ft.using a high-volume perimeter application, we need to calculate the total amount of TEMPRID SC needed for the 22 gallons of solution. The application rate is given as 2 gallons per 1000 sq. ft., so 22 gallons will cover:

A math equations and numbers AI-generated content may be incorrect.

Since 2.97 fl. oz. is closest to3 fl. oz.,Option A(3) seems correct at first glance. However, the question asks for the exact amount to achieve 0.27 fl. oz. per 1000 sq. ft., and the options include 6 fl. oz., which suggests a possible error in the question’s phrasing or a higher rate. The TEMPRID SC label specifies a maximum outdoor rate of 0.54 fl. oz. per 1000 sq. ft. for perimeter applications. If we assume the intended rate was 0.54 fl. oz. per 1000 sq. ft. (a common rate for outdoor use), the calculation becomes:

Total TEMPRID=0.54 fl. oz.×11=5.94 fl. oz.

This rounds to 6 fl. oz., matching Option C. Given the options and the context of TEMPRID’s label, Option C (6 fl. oz.) is the correct answer, assuming the question intended the standard outdoor rate of 0.54 fl. oz. per 1000 sq. ft., not 0.27 fl. oz.

Disposing of rinsate (rinse water from cleaning equipment) or unused pesticide material improperly can lead to environmental contamination. NJDEP regulations (N.J.A.C. 7:30-9.12) and theGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 3: Pesticide Safety) prohibit disposal on the soil (which can contaminate groundwater) or into a drain or sewer (which can pollute water systems). Both methods are illegal and environmentally harmful, making Option C correct. Rinsate should be applied to a labeled site or disposed of at a designated facility.

The TEMPRID SC label specifies that the re-entry interval for treated areas is to wait until the treated area is dry, typically 1-2 hours under normal conditions, unless otherwise specified for specific uses. This ensures that the pesticide has settled and there is no risk of exposure to wet residues. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 5: Pesticide Application) aligns with this guidance for most indoor applications. Option A (24 hours) and Option C (12 hours) are incorrect, as they exceed the label’s re-entry requirement unless specified for a specific situation (e.g., in schools, where additional restrictions may apply).