EPI Data Centre CDCS Full Course Free

A Rated-4 facility requires dual active utility feeds, each from an independent substation, but they may come from the same utility provider if substations are geographically separate and independent.

Option A is too strict; ANSI/TIA-942 does not mandate two different companies.

Options C and D do not provide true independence and would fail Rated-4 requirements.

Thus, the minimum is two substations, possibly same provider.

Electromagnetic field (EMF) strength around cables is primarily influenced by current, not voltage. In a single-phase system, the live and neutral conductors are separated, creating a larger magnetic loop area. This produces stronger stray EMF when current increases.

In a balanced three-phase system, the magnetic fields from the three conductors largely cancel each other out, resulting in much lower net EMF, even at higher currents.

Therefore, the correct statement is that increasing current in single-phase cables produces higher EMF compared to three-phase cables. Options B, C, and D incorrectly link EMF to voltage or incorrect current behavior.

Perforated tiles with integrated dampers are common in raised-floor data centers because they allow airflow regulation at the rack level. However, even when the damper is fully open, the mechanism inside the tile restricts airflow. This typically reduces the delivered airflow by around 10% compared to a non-dampered tile of the same type.

Option A is incorrect because dampers do not affect supply temperature; they only throttle volume.

Option B is wrong since dampers cannot increase volume—they only add resistance.

Option D is partially true that dampers help with temperature balancing, but the main effect (in open position) is volume reduction.

Thus, the technical impact of dampers in open position is a slight airflow reduction, usually quantified as ~10%.

Blast protection should be considered if the data center or its location is a potential target or is near high-risk areas. Blast protection measures can protect both personnel and infrastructure from potential explosion impacts, which could be essential in areas with heightened security risks.

Detailed Explanation:

In areas where there may be risks of terrorist attacks or explosions due to nearby high-risk facilities, implementing blast protection measures helps safeguard the data center's infrastructure. These measures can include reinforced walls, blast-resistant windows, and secure entryways designed to withstand explosive forces.

EPI Data Center Specialist References:

While not specifically mandated by ANSI/TIA-942, EPI training advises considering local risk factors, including proximity to potential targets, when evaluating the need for blast protection. This approach is aligned with risk assessment and mitigation practices to ensure facility security.