All JN0-351 Test Inside Juniper Questions

According to the Juniper documentation1, a native VLAN is a VLAN that carries untagged traffic on a trunk port. A Wi-Fi access point may need a native VLAN to associate untagged traffic with a specific VLAN, such as the management VLAN. On Juniper EX Series switches, you can enable a native VLAN on a switch port by setting the interface-mode to trunk and specifying a native-vlan-id. For example, the following configuration enables a native VLAN with ID 1 on the switch port ge-0/0/12:

set interfaces ge-0/0/1 unit 0 family ethernet-switching interface-mode trunk

set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan members all

set interfaces ge-0/0/1 unit 0 family ethernet-switching native-vlan-id 1

The other options are not correct because they do not address the requirement of untagged traffic. VLAN tagging is the process of adding a VLAN identifier to a frame, which is not needed for untagged traffic. Flexible VLAN tagging is a feature that allows multiple VLAN tags on a single interface, which is not relevant for this scenario. Voice VLAN is a feature that allows voice traffic to be separated from data traffic on a switch port, which is not related to untagged traffic or Wi-Fi access points. References: Understanding Native VLANs on Trunks | Junos OS, Configuring a Native VLAN on a Trunk Port | Junos OS

BGP is a routing protocol that operates between autonomous systems (AS). An AS is a group of routers under a single administrative control. BGP can be classified into two types: internal BGP (IBGP) and external BGP (EBGP). IBGP is the BGP communication between routers within the same AS, while EBGP is the BGP communication between routers in different AS. BGP uses the AS_PATH attribute to record the AS numbers that the route has passed through, and uses it to prevent routing loops and select the best path.

In this scenario, you want to add a second ISP connection and remove the default route to the existing ISP. This means that you want to have more control over the routing decisions and use BGP to exchange routes with both ISPs. To do this, you need to deploy the BGP protocol in your network and configure both IBGP and EBGP sessions. The correct statements about BGP in this scenario are:

IBGP peers advertise routes received from EBGP peers to other IBGP peers. This is the default behavior of IBGP, as it allows the routers within the same AS to learn the routes from different EBGP peers and select the best exit point. However, IBGP has a rule that it does not advertise routes received from IBGP peers to other IBGP peers, to avoid creating routing loops. Therefore, option B is correct and option C is incorrect. To overcome this rule, IBGP requires a full mesh topology, where every IBGP router is directly connected to every other IBGP router, or a route reflector or confederation design, where some IBGP routers act as intermediaries to reflect or aggregate the routes to other IBGP routers.

EBGP peers advertise routes received from IBGP peers to other EBGP peers. This is the default behavior of EBGP, as it allows the routers in different AS to exchange routes and reachability information. However, EBGP has a rule that it does not advertise routes received from EBGP peers to other EBGP peers, to avoid creating routing loops. Therefore, option D is correct and option A is incorrect. To overcome this rule, EBGP uses the AS_PATH attribute to filter out the routes that contain its own AS number, or uses route maps or policies to control the route advertisement. IBGP does not update the next-hop attribute to ensure reachability within an AS, as the next-hop attribute is preserved by IBGP. Instead, IBGP relies on an underlying IGP (Interior Gateway Protocol) to provide reachability to the next-hop.

Junos devices support various types of tunnels for different purposes 1 2 .

Option B is correct.  Generic Routing Encapsulation (GRE) is a tunneling protocol that can encapsulate a wide variety of network layer protocols inside virtual point-to-point links over an Internet Protocol network 1 .  Junos devices support GRE tunnels 1 .

Option D is correct.  IPsec (Internet Protocol Security) is a protocol suite for securing Internet Protocol (IP) communications by authenticating and encrypting each IP packet of a communication session 1 .  Junos devices support IPsec tunnels 1 .

Option A is incorrect. Spanning Tree Protocol (STP) is not a type of tunnel.  It’s a network protocol designed to prevent loops in a bridged Ethernet local area network 2 .

Option C is incorrect.  While Junos devices do support IP-IP (also known as IP tunneling), it’s not supported on all Junos devices 1 .

Option A is correct. Creating multiple areas in OSPF can help to reduce the convergence time . This is because changes in one area do not affect other areas, so fewer routers need to run the SPF algorithm in response to a change.

Option D is correct. Creating multiple areas in OSPF can help to reduce Link State Advertisement (LSA) flooding across the network. This is because LSAs are not flooded out of their area of origin.