VMware 5V0-22.23 Dumps

The maximum amount of capacity disks an administrator can have in disk groups on a single vSAN OSA host is 35. This is because a single host can have up to five disk groups, and each disk group can have up to seven capacity disks. Therefore, the maximum number of capacity disks per host is 5 x 7 = 35. The other options are not correct, as they are lower than the maximum number of capacity disks per host. References: Designing and Sizing vSAN Storage; [vSAN ReadyNode Hardware Guidance]

In a vSAN stretched cluster configuration, both data sites are active sites, but one site must be designated as the preferred site and the other site as the secondary or nonpreferred site. This configuration helps to ensure that data remains on a given site in case of a network partition between the sites. If the network connection between the two active sites is lost, vSAN continues operation with the preferred site, unless it is resyncing or has another issue. The site that leads to maximum data availability is the one that remains in operation. The other options are not relevant to this scenario. References: Introduction to Stretched Clusters; vSAN Stretched Cluster Guide

Two characteristics of the vSAN Data-At-Rest Encryption (DARE) are that it is Software Defined and works independently of the Cache or Capacity drives installed on the Nodes, and that it continues to operate unaffected during downtime on vCenter Server. DARE is a feature that encrypts all data stored on vSAN disks using AES-256 XTS mode. It does not require Self-Encrypting Drives (SEDs) to work, as it uses software-based encryption keys that are generated by an external Key Management Server (KMS) or a vSphere Native Key Provider. DARE also does not depend on the type or size of the disks used in the vSAN cluster, as it encrypts data after all other processing, such as deduplication and compression, is performed. DARE can function even when the vCenter Server is offline or unavailable, as it uses key persistence to store the encryption keys on the ESXi hosts or in a Trusted Platform Module (TPM). The hosts can access the keys without contacting the KMS or the vCenter Server. The other options are notcorrect, as they do not describe DARE accurately. DARE does not need to be enabled together with the vSAN Data-In-Transit encryption, as they are independent features that can be enabled or disabled separately. Data-In-Transit encryption encrypts data that is transmitted between hosts in a vSAN cluster using secure sockets layer (SSL) certificates. DARE is supported on Stretched Cluster environments, as it can encrypt data across multiple sites using site affinity rules. 

To expand disk group #2 to have three capacity devices, the vSAN administrator should add the new capacity device to the disk group and vSAN will automatically rebalance. This action allows the administrator to increase the storage capacity of the disk group without disrupting any ongoing operations or evacuating any data. vSAN will automatically distribute data across all devices in the disk group to balance performance and utilization. The other options are not correct. Creating a new disk group with a single capacity device and then migrating the existing capacity devices is not necessary, as it would require more steps and resources than adding a device to an existing disk group. Putting the entire ESXi host or the disk group in maintenance mode and evacuating all data is not required, as it would cause downtime and data movement that could be avoided by adding a device to an existing disk group. References: Add Devices to the Disk Group; Expanding a vSAN Cluster

The minimum required number of hosts to provide data redundancy for a vSAN stretched cluster using dual-site mirroring and local protection with 1 failure - RAID-1 (Mirroring) is six hosts. This is because a vSAN stretched cluster requires at least three hosts per site, and each site must have enough hosts to tolerate one host failure. Therefore, the minimum configuration is three hosts per site, plus one witness host at a third site, for a total of six hosts. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 14

The reason why the vSAN administrator cannot find any vSAN performance statistics on the cluster summary page is that the vSAN performance service is not enabled. The vSAN performance service is a feature that collects and analyzes performance metrics and displays them in graphical charts in vCenter. The vSAN performance service must be turned on manually for each vSAN cluster, as it is not enabled by default. The other options are not correct. The integration of vRealize Operations Manager with the vSAN cluster is not required to view vSAN performance statistics, as they are available in vCenter. The administrator’s permissions on the cluster level do not affect the visibility of vSAN performance statistics, as they are accessible to any user who can view the cluster. vSAN performance statistics are not only available via CLI, as they can also be viewed in vCenter using the vSAN performance service. References: About the vSAN Performance Service; Enable or Disable the Performance Service

To implement HCI mesh between two clusters on vSAN that are located in geographically separate sites, the vSAN administrator should consider the following requirements:

• Either Layer 2 or Layer 3 communications can be used. HCI mesh supports both Layer 2 and Layer 3 network configurations, as long as the network latency and bandwidth requirements are met3
• The configuration must meet the same latency and bandwidth requirement as local vSAN. HCI mesh requires a network latency of less than or equal to 5 ms RTT between any two hosts in the participating clusters, and a network bandwidth of at least 10 Gbps for the vSAN network vmkernel port3 References: 3: VMware vSAN Specialist v2 Exam Preparation Guide, page 15

The Capacity Reserve feature in vSAN 8.0 OSA reduces the amount of capacity reserved for transient and rebuild operations by using a slack space threshold. This threshold is calculated based on the size of the largest component in the cluster and the number of failures to tolerate. If the used space on vSAN datastore exceeds the suggested slack space threshold, the feature will not operate properly and vSAN will revert to using the host rebuild reserve threshold. The other scenarios will not affect the Capacity Reserve feature. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 28

To prevent vCenter notifications of vSAN Health status during a scheduled maintenance window, the administrator can disable the alarm from the HTML client. This will suppress the alerts for a specified duration or until the alarm is re-enabled. Disabling the performance service, running performance diagnostics, or disabling SNMP service will not affect the vSAN Health status notifications. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 25

To protect a virtual machine against a disk or disk group failure, the storage policy must have a failure tolerance method (FTM) of RAID-1 or RAID-6 and a failure to tolerate (FTT) value of at least 1. RAID-1 mirrors the data across multiple disk groups, while RAID-6 uses erasure coding to stripe the data and parity information across multiple disk groups. RAID-5 is not suitable for this scenario, as it can only tolerate one disk failure per stripe. FTT 2 or 3 would require more disk groups than available in the cluster. Therefore, the correct options are C and E. References: 1, page 8; 2, section 3.1

To ensure that a single rack failure is not going to affect the data availability, while minimizing the number of racks used, the administrator has to do the following:

• Distribute servers across at least three different racks. This is because vSAN supports up to three fault domains per cluster, which can be used to tolerate one or two failures. If only two racks are used, then only one failure can be tolerated4
• Configure three fault domains. A fault domain is a logical grouping of hosts that share a common failure point, such as a rack or a power supply. By configuring fault domains, vSAN can place replicas of an object across different fault domains, so that a failure within one fault domain does not result in data loss orunavailability4 References: 4: VMware vSAN Specialist v2 Exam Preparation Guide, page 13

To deploy a new two-node vSAN cluster with a shared witness, the administrator must meet several requirements, one of which is that the ESXi hosts must have a minimum of 64 GBs of memory. This is because each host must have enough memory to run the VMs and also to support the vSAN metadata overhead. The other options are not requirements for a two-node vSAN cluster with a shared witness. The ESXi hosts do not need SSDs or NVMe for Virtual Flash File System, as they can use any supported storage devices for vSAN. The ESXi host’s controller cache and advanced features do not need to be disabled, as they can be used to improve performance and reliability. The ESXi host’s drives do not need to be configured in RAID 1, as vSAN uses its own software-defined RAID mechanism to provide Failures to Tolerate. References: Shared Witness for 2-Node vSAN Deployments; Two-Node Cluster Requirements

The purpose of the TRIM/UNMAP process is to reclaim disk space that is no longer used by the guest operating system or the virtual machine. TRIM and UNMAP are commands that allow the guest operating system to inform the underlying storage layer that certain blocks are no longer in use and can be freed up. This process helps to improve storage efficiency and utilization,especially for thin-provisioned disks that grow dynamically as data is written to them. The other options are not correct. The TRIM/UNMAP process does not collect vSAN log files, repair internal cache errors, or delete orphaned snapshots. These are different tasks that are performed by other tools or processes. References: Enabling TRIM/UNMAP Commands for VMware Cloud on AWS Clusters; Reclaiming guest OS storage in VMware vSAN 6.7 U1 with TRIM/UNMAP process

The VMware solution that requires vSAN usage is VMware Cloud Foundation. VMware Cloud Foundation is an integrated software stack that bundles compute virtualization (VMware vSphere), storage virtualization (VMware vSAN), network virtualization (VMware NSX), and cloud management and monitoring (VMware vRealize Suite) into a single platform that can be deployed on premises or as a service within a public cloud. VMware Cloud Foundation relies on vSAN as the primary storage solution for its workload domains, which are logical pools of resources that can be used to run different types of workloads. The other options are not correct. VMware Horizon, VMware Telco Cloud Automation, and VMware Aria Automation are VMware solutions that do not require vSAN usage, although they can benefit from it. VMware Horizon is a platform that delivers virtual desktops and applications across a variety of devices and locations, and it can use any supported storage solution, including vSAN. VMware Telco Cloud Automation is a cloud-native orchestration and automation platform that enables communication service providers to accelerate the deployment and lifecycle management of network functions and services across any network and cloud. It can use any supported storage solution, including vSAN. VMware Aria Automation is not a valid VMware solution name. References: VMware Cloud Foundation Overview; VMware Horizon Overview; VMware Telco Cloud Automation Overview

To view the resynchronizing metrics, the vSAN administrator should open the Backend performance category. This category shows the performance of vSAN data components, such as read/write latency, IOPS, throughput, congestion, and resync traffic. The other categories are not relevant for this task. Disks shows the performance of physical disks in the cluster, Host Network shows the network performance of vSAN hosts, and Resvnc Latency shows the latency of resynchronization operations. References: 1, page 23; 3, section 6.4

To configure vSAN Direct, the administrator must meet two requirements: a valid vSAN license for the vSAN cluster and unclaimed disks in the hosts for vSAN Direct. A vSAN license is required to enable vSAN features and services, including vSAN Direct. Unclaimed disks are local storage devices that are not used by vSAN or any other service, and can be claimed by vSAN Direct to create datastores for persistent storage. The other options are not requirements for vSAN Direct. HA is an optional feature that can be enabled on any cluster, but is not specific to vSAN Direct. A dedicated network for vSAN Direct is not necessary, as vSAN Direct uses the same network as vSAN. An integration with vSAN File Services is not required, as vSAN Direct does not provide file shares, but block storage. References: Set Up vSAN Direct for vSphere with Tanzu; vSAN Licensing Guide

Horizon and Dynamic Environment Manager are two end-user computing (EUC) solutions that can be implemented on vSAN storage to provide a virtual desktop infrastructure (VDI) solution and store applications running inside the VDI environment. Horizon is a platform that delivers virtual desktops and applications across a variety of devices and locations, while Dynamic Environment Manager is a tool that provides personalization and dynamic policy configuration across any virtual, physical, and cloud-based Windows desktop environment. The other solutions are not directly related to VDI or application storage on vSAN. References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 8, Objective 3.5; [Horizon]; [Dynamic Environment Manager]

Two actions that would cause some objects to be currently resyncing are:

• A change to the storage policy is applied to the objects. This action triggers a resynchronization of objects to make them compliant with the new policy settings, such as FTT, RAID level, stripe width, etc. The resynchronization process copies data from one host to another to create or update replicas or parity segments.
• A host failure occurs in the cluster. This action causes some objects to become non-compliant with their storage policy, as they lose one or more replicas or parity segments due to the host failure. The resynchronization process rebuilds the missing components on other hosts in the cluster to restore compliance and availability.References: : VMware vSphere Storage Guide, page 129 : Monitor the Resynchronization Tasks in the vSAN Cluster 1 : VMware vSAN Specialist v2 Exam Preparation Guide, page 13

To achieve the best performance for the database virtual machines and tolerate two host failures in a vSAN OSA cluster, the administrator must use RAID-1 as the RAID configuration in the storage policy. RAID-1 is a mirroring technique that creates multiple replicas of each object across different hosts. RAID-1 provides the best performance among the available RAID configurations, as it does not involve any parity calculations or stripe splitting. To tolerate two host failures, the administrator must set the Failures to Tolerate (FTT) policy to 2, which means that each object will have three replicas. The other options are not correct. RAID-5 and RAID-6 are erasure coding techniques that split each object into data segments and parity segments across different hosts. RAID-5 can tolerate one host failure, while RAID-6 can tolerate two host failures. However, both RAID-5 and RAID-6 have lower performance than RAID-1, as they involve more complex calculations and network traffic. RAID-0 is a striping technique that splits each object into multiple stripes across different hosts. RAID-0 does not provide any data redundancy or fault tolerance, and therefore cannot tolerate any host failure. References: RAID Configurations, FTT, and Host Requirements; RAID 5 or RAID 6 Design Considerations

To upgrade multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters, the administrator can upgrade two witness node types: appliance witness node and nested witness node. An appliance witness node is a virtual ESXi host that runs on a physical ESXi host and contains the witness components of VM objects stored in the vSAN cluster. A nested witness node is a virtual ESXi host that runs on another virtual ESXi host and contains the witness components of VM objects stored in the vSAN cluster. Both types of witness nodes can be managed by vLCM as independent nodes since vSphere 7.0 Update 3, as long as they are version 7.0 Update 2 or later. The other options are not correct. A shared witness node is a witness node that serves multiple vSAN clusters, which is not supported by vLCM. A dedicated witness node is a witness node that serves only one vSAN cluster, which is not a specific type of witness node. A physical witness node is aphysical ESXi host that contains the witness components of VM objects stored in the vSAN cluster, which cannot be upgraded by vLCM. References: vSphere Lifecycle Manager and the vSAN Witness Hosts; Shared Witness for 2-Node vSAN Deployments

To avoid storage policy non-compliance, the vSAN maintenance mode option that should be used is Full data migration. This option evacuates all data from the host to other hosts in the cluster and maintains the current object compliance state. This means that the VM objects will have access to all their replicas and will be compliant with their assigned storage policies. The other options might result in storage policy non-compliance, as they do not guarantee full data redundancy or policy adherence. Ensure accessibility only migrates the components that are essential for running the VMs, but might not have access to all their replicas. Partial maintenance mode is not a valid option for vSAN clusters. No data migration does not evacuate any data from the host and might result in VM unavailability or data loss. References: Working with Maintenance Mode; Place a Member of vSAN Cluster in Maintenance Mode

The impact to any virtual machine that was running on the failed host using vSANPolicy1 is that each virtual machine will be restarted on another vSAN host using vSphere HA. This is because vSANPolicy1 has a Failures to Tolerate setting of 1 failure - RAID-5 (Erasure Coding), which means that each object has four components (three data and one parity) distributed across four hosts. If one host fails, the object can still be accessed with the remaining three components,and vSphere HA will restart the virtual machine on another host. vSAN will also try to rebuild the missing component on another host, if there is enough capacity and resources. The other options are incorrect because they either assume that the object is unavailable or that the recovery process is delayed or impossible. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 16