Full Access Huawei H35-211_V2.5 Tutorials

In eSight’s ONT Zero-Touch workflow, multi-service profiles define service parameters delivered to ONTs—primarily service VLANs such as Internet/Data VLAN, Voice VLAN, and IPTV/Multicast VLAN with related QoS. Hardware attributes like ONU type or Ethernet port count are part of the device/ONT profile, not the multi-service profile. A generic “Default VLAN” parameter is not used here; instead, explicit service VLANs are specified (for example, data VLAN and voice VLAN).

In capacity planning, the planned bandwidth is computed as:

Planned Bandwidth = Users × Penetration × Concurrency × Online Bandwidth × Duty Cycle × Channels × Coverage.

Substituting the values: 500 × 0.5 × 0.4 × 4 Mbit/s × 0.125 × 1 × 0.7

= 250 × 0.4 × 4 × 0.125 × 0.7

= 100 × 4 × 0.125 × 0.7

= 400 × 0.125 × 0.7

= 50 × 0.7

= 35 Mbit/s.

This matches the given result, so the statement is true.

XG-PON (10G GPON) adopts XGEM framing. Compared with GPON’s 12-bit GEM Port-ID, XGEM expands the Port-ID field to 16 bits, increasing the number of logical data flows that can be identified per ONU/OLT and improving service granularity. Hence the correct length is 16 bits.