Download Full Version 3V0-23.25 VMware Exam

Four hosts are required to meet the 12 TB usable-capacity requirement after applying the protection policy, data reduction, reserves, and overhead. Each host contributes 8 TB raw capacity from two 4 TB NVMe devices. Three hosts provide 24 TB raw capacity, but once host rebuild reservation, 10% operational reserve, RAID-5 protection overhead, and 25% filesystem/object overhead are considered, the remaining effective usable capacity falls below the required 12 TB target. Four hosts provide 32 TB raw capacity. With vSAN ESA and FTT=1/RAID-5, vSAN uses erasure coding to improve capacity efficiency compared with mirroring. The vSAN sizing guidance states that RAID-5 with FTT=1 provides approximately 75% usable capacity before other reserves and overhead. Host Rebuild Reserve must also be planned so the cluster has enough free capacity to rebuild components after a host failure. After applying the expected 1.5 data reduction ratio and the required reserves, four hosts provide enough usable capacity while three hosts do not. Reference topics: vSAN ESA Capacity Sizing, RAID-5 Erasure Coding, Host Rebuild Reserve, Operations Reserve, vSAN Object Overhead.

vSAN Stretched Clusters meet the availability-zone requirement by extending a single logical vSAN cluster across two availability zones and using a witness for quorum. This provides rapid recovery from a site or availability-zone failure because workloads remain protected by the stretched topology and vSAN site-failure tolerance. vSAN Storage Cluster addresses the need for scalable, high-performance storage that can grow independently as application capacity requirements increase. In VCF 9.0, a vSAN Storage Cluster is based on vSAN ESA and provides disaggregated storage to vSAN compute or HCI clusters. This design supports storage-dense NVMe-based nodes, high IOPS, low latency, independent capacity scaling, and centralized storage services. Encryption at rest and in transit are native vSAN capabilities that can be enabled on the vSAN-backed storage architecture. vSAN File Service is for file shares, and vSAN iSCSI Target Service is for presenting block LUNs to external initiators; neither is required by the stated application-storage design. vSAN Data Protection is valuable for snapshots and recovery points, but the core architecture requirements are best satisfied by stretched site resilience plus scalable vSAN storage clustering. Reference topics: vSAN Storage Cluster, vSAN Stretched Cluster, vSAN ESA, vSAN Encryption.

A shallow rekey operation rotates only the Key Encryption Key (KEK). In vSAN Data-at-Rest Encryption, vCenter obtains or generates the KEK through the configured key provider, while ESX hosts use Data Encryption Keys (DEKs) to encrypt the actual disk or object data. The KEK is used to protect, or wrap, those DEKs. When a shallow rekey is performed, the underlying encrypted data does not need to be rewritten because the DEKs remain the same; only the KEK changes, and the existing DEKs are re-encrypted with the new KEK. This is why shallow rekey is faster and less disruptive than a deep rekey. A deep rekey generates both a new KEK and new DEKs, requiring re-encryption of data. The Host Key is used for encrypted core dumps, not datastore data encryption. Key Derivation Key is not the key rotated in this vSAN shallow rekey workflow. Reference topics: vSAN Data-at-Rest Encryption, Generate New Encryption Keys, Shallow Rekey, Deep Rekey, KEK and DEK lifecycle.