CWDP Wi-Fi Design CWDP-305 Exam Questions and Answers PDF

Starting with a Tx Power Level of "1" at 17 dBm, each increment halves the power:

Level 2: 17 dBm - 3 dB = 14 dBm

Level 3: 14 dBm - 3 dB = 11 dBm

Level 4: 11 dBm - 3 dB = 8 dBm

Converting 8 dBm to mW:

10^(8/10) ≈ 6.31 mW

The closest provided option is 6.25 mW.

When aesthetics are a concern, one acceptable approach—assuming AP performance and RF behavior will not be affected—is to use manufacturer-approved or specially designed cosmetic covers/skins. These allow the AP to blend into the environment without altering signal propagation.

From CWDP-305:

“Cosmetic or aesthetic AP skins and mounts can be used when design constraints do not permit repositioning APs. These solutions preserve the intended RF coverage while meeting visual requirements.”

— Reference: CWDP-305 Official Study and Reference Guide, Wireless Design Process

The Received Signal Strength Indicator (RSSI) is a measure of the power present in a received radio signal. While it is commonly used in WLAN location-based services due to its simplicity and the fact that it doesn't require additional hardware, RSSI-based positioning is susceptible to environmental factors like multipath propagation and signal attenuation, leading to lower accuracy.

In contrast:

Angle of Arrival (AoA) determines the direction of the incoming signal, offering better accuracy.

Time of Arrival (ToA) measures the time it takes for a signal to travel from the transmitter to the receiver, providing precise distance measurements.

Time Difference of Arrival (TDoA) calculates the difference in arrival times between multiple receivers, enhancing location accuracy.

Comprehensive and Detailed Explanation:

In designing Point-to-Point (PTP) outdoor wireless links, local vegetation plays a significant role in signal propagation and potential attenuation. Key considerations include:

A. Leaves:Foliage, especially leaves, can absorb and scatter RF signals, particularly at higher frequencies. Seasonal changes can affect signal strength due to varying leaf density.

B. Tree height growth:Over time, trees can grow into the line-of-sight path, causing signal obstruction. Planning should account for potential future growth to maintain clear paths.

C. Water density:Vegetation with high water content can absorb RF energy, leading to increased signal attenuation. This is especially pertinent in areas with lush, dense foliage.

D. Reflection factor:While reflections can impact signal quality, in the context of vegetation, absorption and scattering are more critical factors than reflection.