Complete CWDP-305 CWNP Materials

Comprehensive and Detailed Explanation:

The 802.11 amendments that address regulatory and transmission requirements are:

C. 802.11d:This amendment provides country-specific information, allowing devices to operate in compliance with local regulations regarding frequency use and power levels.

E. 802.11h:Introduced to address spectrum and transmission power management in the 5 GHz band, this amendment includes features like Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC) to mitigate interference with radar systems and adhere to regulatory requirements.

A. 802.11kfocuses on radio resource management.

B. 802.11ipertains to security enhancements.

D. 802.11fdeals with inter-access point protocol for roaming.

Centralized data forwarding means all wireless traffic is tunneled back to a central controller, which handles tasks such as filtering, firewalling, and policy enforcement.

From CWDP-305:

“Centralized data forwarding enables consistent policy enforcement and traffic filtering by handling all traffic at the controller rather than at individual APs.”

This approach provides better control and visibility, especially in environments with strict security and traffic management requirements.

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Infrastructure Design

In a Single Channel Architecture (SCA), all access points (APs) operate on the same channel and share a virtual Basic Service Set Identifier (BSSID).The wireless controller manages client associations by directing the client to the AP with the strongest Received Signal Strength Indicator (RSSI), ensuring optimal connectivity.

The CWDP-305 Official Study and Reference Guide explains:

"Using a SCA means that all APs will be using the same channel in a given layer. How is the AP with which the client associates determined? C. All APs share a virtual BSSID. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client."

Comprehensive and Detailed Explanation:

In wired networks, VLANs effectively segment traffic into separate broadcast domains, isolating traffic between different VLANs. However, in wireless networks, while VLANs are used to assign different SSIDs to different VLANs, the wireless medium is inherently shared. This means that, despite VLAN assignments, all wireless traffic is transmitted over the same RF medium, and clients can still hear all transmissions. Therefore, wireless VLANs do not always provide the same level of traffic segmentation as wired VLANs.