CCA-V 1Y0-205 Passing Score

 The administrator can add the partition information to the SNMP traps by using the command set snmp alarm partition-name on the Citrix ADC. This command enables the Citrix ADC to include the name of the partition that generated the trap in the SNMP trap message. This way, the administrator can easily identify which partition has the load balanced virtual server that is down. The other options are not relevant or effective for this purpose. See SNMP alarms for more details.

According to the Citrix documentation1, burst capacity allows an instance to use more bandwidth than its dedicated bandwidth when there is spare bandwidth available on the SDX appliance. The priority parameter determines which instance gets the spare bandwidth first. A higher priority value indicates a higher priority. Therefore, the administrator can configure burst capacity of 1GB with priority 10 on the instance that requires more bandwidth, to meet traffic requirements.

1: Citrix Virtual Apps and Desktops 7 Deployment and Administration - Configure burst capacity

Option A is correct because if the VDA machine is not registered with the Site where the Citrix policy was configured, it will not receive the policy settings from the Site database. The VDA machine must register with a Delivery Controller in the Site to apply the Citrix policies1

Option B is correct because the Unfiltered policy is applied to all objects in the Site by default, and it has the lowest priority. If the Unfiltered policy contains settings that conflict with the Citrix policy configured by the administrator, the Unfiltered policy settings will override the administrator’s policy settings. The administrator can either disable the Unfiltered policy or change its priority to avoid this issue2

Option D is correct because if the VDA machine is not able to communicate with the Site database, it will not be able to retrieve the latest Citrix policy settings from the database. The VDA machine relies on the Delivery Controller to communicate with the Site database and apply the Citrix policies3

A server certificate is required for StoreFront to use HTTPS connections. A server certificate identifies the server and establishes trust between the server and the client. A client certificate is used to authenticate the client to the server, which is not necessary for StoreFront. An intermediate certificate is issued by a trusted root authority to another certificate authority, and is not used for server identification. A root certificate is the top-most certificate of the tree, and is used to validate the trustworthiness of the certificate authorities below it, but it is not used for server identification.

For more information, see How to Generate and Install an SSL Certificate on a StoreFront Server for HTTPS connections and Securing StoreFront with HTTPS.