1z0-404 Exam Dumps : Oracle Communications Session Border Controller 7 Basic Implementation Essentials

It is necessary to locate the SIP session to troubleshoot and check if there is a 404 Routes Not Found SIP error message.

It is recommended to look for 183 Session Progress SIP error messages that indicate routing issues.

It is recommended to check the called number by looking at the Request-URI of the INVITE message and making sure it is a valid number to be routed.

It is recommended to find the CANCEL method received by the Session Border Controller which typically identifies a SIP routing issue.

It is necessary to find an initial INVITE received by the Session Border Controller which gets a 503 Service Unavailable SIP error message.

From configuration mode, execute the done command.

From superuser mode, execute the write-config command.

From user mode, execute the save-config command.

From user mode, execute the commit-config command.

From superuser mode, execute the save-config command.

Navigate to the bootparams configuration branch and set the host inet field to the IP address of the external BOOTP Server from which the Session Border Controller can boot.

Navigate to the system configuration branch and set the ip address field of the wancom1 management interface.

Navigate to the bootparams configuration branch and set the ip address field of the destination SIP device with which the Session Border Controller needs to interact.

Navigate to the system configuration branch and set the ip address field of the wancom0 management interface.

Navigate to the bootparams configuration branch, set the host inet or Host IP, FTP username, and FTP password for the external FTP Server in which the image file resides.