PDF H13-629_V2.5 Study Guide

5 devices TOE NIC A0, B1, and A0, B3 inserted into the PCIe slot will not affect the system. Deployment will not affect the network bandwidth, so it cannot be adjusted.

The signal cables are long and need to be strapped to the cabinet or placed on the bottom tray.

Label NODE 01 A0-0 The signal cable is inserted in the network port A0-1. The signal cable labeled NODE01 B3-1 is inserted in the network position B3-0, due to the same network card two network port peer, you can place the wrong line, you cannot adjust.

CE6850 switch connected to two stacked copper cables, one of which is needed to post-cold more cold, because it does not affect the network interoperability. You can base this software debugging.

Snapshot does not support nested, that is, the snapshot has been created directory, the parent directory and subdirectories can no longer create a snapshot

The root directory of the snapshot (that is, the directory used to create the snapshot) does not support deletion

Hard links are protected by snapshots, soft links are not protected by snapshots

For a snapshot with an expiration time set, the system automatically deletes the snapshot but does not back up the storage space occupied by the snapshot data after the snapshot expires

One Ethernet port can be used to create multiple logical ports

If you type Ethernet ports A and B into VLAN 2, by default the port A and B data are in the same drift group

If binding port A and physical port B are added to the same VLAN, as long as one physical port in bonded port A fails, the service switches to Physical Port B

When IP Fallback mode is set to Manual, when the port fails to recover, the active port link is in normal status and lasts longer than 1 minute, the system can switch the service to the primary port

offline mining

database

mailbox

public folder