Online 300-430 Questions Video

 Cisco AVC (Application Visibility and Control) on a Cisco Wireless LAN Controller (WLC) is used to prioritize traffic by marking the packets. For Cisco IP cameras that use the wireless network, the AVC rule would be configured to mark the packets with a specific QoS value, ensuring that the video traffic is treated with higher priority as it traverses the network. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The feature required on the Cisco Wireless LAN Controller to support dynamic VLAN mapping is AAA override. This feature allows for the assignment of VLANs on a per-user basis as determined by the authentication, authorization, and accounting server. When AAA override is enabled, attributes such as VLAN ID can be dynamically applied to a user’s session after successful authentication and authorization. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

 In a Cisco WLAN deployment where it is required that all APs from branch1 remain operational even if the control plane CAPWAP tunnel is down, the operational mode that must be configured on the APs is standalone (option B). In standalone mode, the APs can continue to function and provide network access to clients even without a connection to the WLC, which is essential during a WAN failure to headquarters. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, with a focus on AP operational modes and their behavior during network disruptions.

If the Cisco 5520 Series Wireless LAN Controller is no longer manageable via the network after implementing a CPU ACL, permit statements must be added to the top of the ACL in both directions (A). These statements should specify the network from which management is allowed and the virtual interface of the controller to ensure proper management access. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide