H13-511_V5.5 Reviews Questions

The HCIA–Cloud Computing syllabus explains that routers are responsible forinter-network communicationand packet forwarding based onIP addresses. In the TCP/IP reference model, this function corresponds to theNetwork layer.

Routers analyze the destination IP address of a packet and use routing tables and routing protocols to determine thebest pathfor forwarding the packet to its destination. This behavior is distinct from switches, which forward frames based on MAC addresses at the data link layer.

TheData link layer (A)is associated with switches, theTransport layer (D)handles end-to-end communication (such as TCP and UDP), and theApplication layer (C)provides services to applications.

Therefore, according to HCIA–Cloud Computing network fundamentals, the correct answer isNetwork layer.

Bare VM creation rules in FusionAccess are strict to ensuretemplate consistency and successful provisioning:

Ais true: The system disk must useCommon configuration mode, not thin provisioning.

Bis true: For linked-clone bare VMs, NICs are addedafter template creation, during desktop provisioning.

Cis false: Bare VMs should usemanagement-plane networking, not user service-plane DVS/port groups.

Dis false: Thin provisioning isnot allowedfor the system disk of a bare VM.

Therefore, the correct answers areA and B.

When creating a Windows template in FusionAccess, the Template Tool must be mounted and installed inside the VM.

According to HCIA documentation:

The template tool installs necessary drivers, services, and agents required for desktop provisioning, management, and optimization.

Without mounting and installing the template tool, the VM cannot be converted into a usable desktop template.

Other operations such as configuration and conversion are subsequent steps, but mounting the template tool is mandatory.

Therefore, the correct answer is A.

In the shown topology, RTA and RTB are directly connected on10.0.0.0/24(RTA: 10.0.0.1/24, RTB: 10.0.0.2/24). RTB and RTC are directly connected on20.1.1.0/24(RTB: 20.1.1.2/24, RTC: 20.1.1.3/24). In HCIA networking fundamentals, a router forwards packets based on its routing table, and thenext hop must be reachable on a directly connected network(or resolved via recursion), meaning it is typically theneighbor router interface on the local link.

A is false: For traffic fromRTA to RTC (20.1.1.3), RTA’s next hop should beRTB’s interface 10.0.0.2(its directly connected neighbor). The address20.1.1.2is not on RTA’s directly connected subnet, so it cannot be used as the immediate next hop in this basic routing scenario.

B is true: RTC must have a route back to10.0.0.0/24(for return traffic to RTA). Since RTC only knows its directly connected network20.1.1.0/24, a static/default route is required pointing to20.1.1.2.

C is true: RTB has two directly connected networks (10.0.0.0/24 and 20.1.1.0/24), so it can reach both RTA and RTC withno additional routes.

D is false: RTB does not need extra routing configuration for RTA↔RTC communication because both networks are alreadydirectly connectedon RTB.