Download Latest NS0-162 Questions

The space allocation option is a LUN attribute that enables the host to communicate with the storage system about the blocks that are no longer in use by the host file system. When the space allocation option is enabled, the host sends SCSI UNMAP commands to the storage system when files are deleted on the disk. The storage system then reclaims the space from the thin-provisioned LUN and makes it available for other LUNs or volumes. This process is also known as space reclamation or hole punching. If the space allocation option is disabled, the host does not send SCSI UNMAP commands and the storage system does not reclaim the space from the thin-provisioned LUN, resulting in a discrepancy between the host and the storage system. References :- Space reclamation, Enable or disable the space allocation option for a LUN

 According to the NetApp best practices, flow control should be disabled on data network ports and cluster network ports using 10GbE Ethernet. This is because flow control can cause excessive pause frames, xon/xoff frames, or packets being re-queued, which can affect the network performance and TCP throughput. Flow control works at the physical link layer and does not consider the upper level protocols. Therefore, it is recommended to disable flow control end-to-end on both data and cluster network ports for optimal performance. References :- How to modify flow control on cluster port in ONTAP, What are the flow control best practices for Ethernet?, Configure your network for best performance

The igroup is a logical grouping of initiators that can access a set of LUNs. The igroup must contain the IQNs (iSCSI Qualified Names) or WWPNs (World Wide Port Names) of the initiators that need to access the LUNs. In this scenario, the igroup named “ESX” has the iSCSI protocol and the VMware OS type, but it does not have any initiators listed. This means that the VMware hosts cannot authenticate and connect to the LUNs in the SVM. To resolve this issue, the igroup must be populated with the correct initiators that match the VMware hosts. This can be done by using the igroup add command or the System Manager GUI12. References :- Create an igroup, Add initiators to an igroup

The space guarantee setting determines how much space is reserved in the aggregate for the volume. A space guarantee of “none” means that no space is reserved for the volume, and the volume can use any available space in the aggregate. This approach to space management is called thin provisioning. This setting would prevent the hosting aggregates from showing a decrease in available space when creating new volumes, as long as the aggregate is not overcommitted. References :- How volume guarantees work with FlexVol volumes, How you set space guarantees for new or existing volumes, What is the impact of changing volume space-guarantee from “volume” to “none”?