Summer Special - Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: top65certs

Cisco 300-815 Questions Answers

Page: 3 / 18
Total 242 questions

Implementing Cisco Advanced Call Control and Mobility Services (CLACCM) Questions and Answers

Question 9

Which two descriptions of the Standard Local Route Group deployment are true? (Choose two.)

Options:

A.

can be associated under the route group

B.

can be associated only under the route list

C.

chooses the route group that is configured under the device pool of the calling-party device

D.

chooses the route group that is configured under the device pool of the called-party device

E.

can be assigned directly to the route pattern

Question 10

If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern “123”?

Options:

A.

12!

B.

12X (urgent priority set)

C.

1XX (urgent Priority Set)

D.

12[2-5]

Question 11

Refer to the exhibit. An engineer is trying to set up a new deployment using the SIP provider with TCP for signaling. After troubleshooting, the customer notices that the matching incoming dial peer and outgoing dial peer did not generate the INVITE to the SIP provider. Why is the call failing?

Options:

A.

The ITSP is sending FIN.

B.

The ITSP is not sending the ACK.

C.

The ITSP is sending CLOSE state.

D.

The ITSP is not answering the SYN.

Question 12

A customer routes PSTN calls to ITSP through a SIP trunk on Cisco UCM that forwards and receives calls to and from ITSP. ITSP is set to send an E.164 number when the customer's extension is four digits. Which action should be taken to route the incoming calls to four-digit extensions?

Options:

A.

Configure a voice translation rule to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.

B.

Set the Significant Digits to 4 on the SIP trunk.

C.

Configure a voice translation profile to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.

D.

Set the Significant Digits to 8 on the SIP trunk.

Page: 3 / 18
Total 242 questions