Labour Day Special - Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: top65certs

CCE-N 1Y0-440 Full Course Free

Page: 9 / 11
Total 152 questions

Architecting a Citrix Networking Solution Questions and Answers

Question 33

Scenario: A Citrix Architect has configured a load balancing virtual server for RADIUS authentication. The architect observes that, when the radius authentication action has the virtual server IP address, the authentication falls. However, when any of the individual server IP addresses are used, the authentication works fine.

How should the architect troubleshoot this issue?

Options:

A.

Change the Logon name attribute in Radius Action

B.

Ensure that TCP port 1821 is open from NSIP to backend Radius servers

C.

Verify the shared secret on Citrix ADC

D.

Change the Radius client from NSIP to SNIP on the Radius server

Question 34

Which IP address should be bound to VLAN 11?

Options:

A.

40.50.60.2

B.

192.168.30.2

C.

40.50.60.172

D.

192.168.20.170

E.

192.168.20.2

F.

192.168.30.171

G.

40.50.60.172

Question 35

Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a NetScaler design project. They captured the following requirements from this design discussion:

  • A pair of NetScaler MPX appliances will be deployed in the DMZ network.
  • High Availability will be accessible in the NetScaler MPX in the DMZ Network.
  • Load balancing should be performed for the internal network services like Microsoft Exchange Client Access Services and Microsoft App-V.
  • The load balancing should be performed for StoreFront.
  • The NetScaler Gateway virtual server will be utilizing the StoreFront load-balancing virtual server.
  • The NetScaler Gateway virtual server and StoreFront.
  • The NetScaler Gateway virtual service and StoreFront and load-balancing services are publicly accessible.
  • The traffic for internal and external services must be isolated.

Click the Exhibit button to review the logical network diagram.

Which two design decisions are incorrect based on these requirements? (Choose two.)

Options:

A.

LB StoreFront bound to traffic Domain 0

B.

Citrix Gateway VIP bound to Traffic Domain 1

C.

LB APP-V bound to Traffic Domain 1

D.

SNIP 192.168.20.2 bound to Traffic Domain 1

Question 36

Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a Citrix ADC design project. They captured the following requirements from this design discussion:

• All three (3) Workspacelab sites (DC, NDR, and DR) will have similar Citrix ADC configurations and design.

• The external Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Active mode.

• ADNS service should be configured on the Citrix ADC to make it authoritative for domain nsg.workspaceIab.com.

• In GSLB deployment, the DNS resolution should be performed to connect the user to the site with least network latency.

• On the internal Citrix ADC, load balancing for StoreFront services, Citrix XML services, and Citrix Director services must be configured.

• On the external Citrix ADC, the Gateway virtual server must be configured in ICA proxy mode.

Which GSLB method should the architect utilize to meet the design requirements?

Options:

A.

Dynamic RTT

B.

Static Proximity

C.

Least Bandwidth

D.

Least Packets

Page: 9 / 11
Total 152 questions