156-315.82 Premium Exam Questions

The correct answer is D. When a Management Server is migrated or upgraded to R82 with a changed IPv4 address, Check Point can require the special mdss.json configuration file. The documented JSON structure identifies the applicable Management Server object through the " name " field and supplies its new address through " newIpAddress4 " . Multiple server objects can be included when several Management or Log Servers change addresses. The file is named mdss.json and is placed in /var/log/ on the applicable servers. Option A incorrectly assumes both old and new IP-address fields are required. Options B and C use field names that are not part of the documented schema. This question specifically tests the JSON structure, rather than merely the conditions under which the file becomes necessary. Reference topic: Management Server Migration / Required JSON Configuration File.

The intended answer isB, but the technically exact directory is usually written as$FWDIR/state/__tmp/FW1/with a double underscore. The temporary policy directory is used when policy files are transferred to the Security Gateway before they are committed as the local installed policy. Option A, $FWDIR/state/local/FW1, is the committed/local policy directory, not the transfer staging directory. Option C is wrong because the directory is FW1, not FW-1. Option D is wrong because $CPDIR is not the firewall policy state path used for this transfer. So use optionBfor the exam, but remember the precise technical path is__tmp, not _tmp.

========

The correct answer isA. ElasticXL automatically configures the Sync network to192.0.2.0/24. Check Point’s R82 ElasticXL important notes state this directly. The Sync interfaces of all ElasticXL Cluster Members in the same cluster must connect to the same Layer 2 broadcast domain, usually a dedicated Layer 2 switch or VLAN. The Sync interface must not be configured as a VLAN trunk, and only one ElasticXL Cluster is supported in the same Layer 2 broadcast domain. Option B, 192.168.2.0/24, is a private RFC1918-style address but not the ElasticXL default. Option C, 192.0.0.0/24, is not the documented Sync network. Option D is also not correct. The OCR in the uploaded file mangles the address, but the official value is unambiguous:ElasticXL Sync network = 192.0.2.0/24. Reference topic:ElasticXL Important Notes / Sync network automatic configuration.

========

The correct answer isA. During the transfer phase of policy installation, CPTA sends the compiled/prepared policy files to the Security Gateway, where they are first staged in a temporary policy directory before being committed. The expected temporary staging directory is $FWDIR/state/_tmp/FW1. This distinction matters because $FWDIR/state/local/FW1 is associated with the committed/local policy state after the gateway completes the local fetch/commit process, not the first temporary transfer location. Option C is wrong because $CPDIR is not the firewall policy state directory used for this stage. Option D is syntactically wrong; it uses state_tmp instead of the correct state/_tmp structure. Check Point troubleshooting material around policy installation also references files being transferred into the temporary $FWDIR/state/__tmp/FW1-style directory before local commit/installation processing. For the CCSE answer set, the intended answer is the temporary transfer directory:$FWDIR/state/_tmp/FW1. Reference topic:Policy Installation Flow / CPTA Transfer Directory.

========