A customer need to update the local sever at each of their branches keep up with the
increasing demand for High-performance storage. The customer cannot afford to move to
SAN at each state. Which HPE storage technology can increase performance for this
customer?
A customer need a backup solution to their virtualized environment .The backup solution
must be agentless ,hypervise independent and integrated with HPE storage solutions. The
solution must support Nimble snapshot and replication management. What products meets
the customer requirement?
After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC)
configuration and want to raise it from 256 to 768GB. Which action is needed to take advantage of the new AFC configuration?
During Technology workshop ,the customer asks about different between converged and
fibre channel switches. What would be a benefits of using flex fabric switches in a fibre
channel storage environment?
What has to taken into account when performing capacity planning for HPE Nimble storage using deduplication?
What are two advantages of HPE Recovery Manager Central? (Select two.)
A customer has a large deployment of HPE Synergy compute modules. HPE 3PAR StoreServ arrays, and HPE StoreOnce system in a single data center. They are concerned about the risk of data loss due to site disaster and seeks cost-effective offsite Disaster Recovery protection without the need to deploy a secondary site.
Which HPE solution should you recommend?
Refer to the exhibit:
Which type of data format do you expect in the red rectangle?
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?
A customer uses Recovery manager central for Vmware (RMC-V).They need to ability to
perform granular recovery of application item directly from backups...Which solution
integrates with RMC-V to provide the desired requirements?
What advantage does the Unified API that is part of HPE’s composable strategy provide?
An HPE 3PAR StoreServ 9000 All-Flash Array customer plans to deploy a secondary array 20 km away from their primary array to enable storage replication over a dark fibre. Their existing environment consists of one HPE Synergy Frame 12000, HPE SN6000B Fibre Channel Switches, HPE FlexFabric 5700 Switch Series, and HPE StoreOnce Systems.
Which HPE license is required to meet the customer’s technical requirements?
A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports.
Which feature will address the customer’s concern?
A customer wants to make a full copy replica of a database to use for performance testing.
Which technology should they use to create the copy?
You have proposed a Primera array to a customer for primary storage. The customer currently has an older HPE 3PAR array and will continue to use it moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)
You are proposing a new Nimble solution to a customer that recently experienced data loss in their existing storage array.
Which features of the Nimble array should you emphasize to your customer to address their concerns? (Choose two.)
You have proposed that a customer replace their legacy SAN switches with new ?-Series switches. They are concerned about the management of all the devices, so you have included SANnav in the proposal.
What are the benefits of SANnav that you should emphasize to this customer? (Choose two.)
A customer asks you for a recommendation on setting up their new StoreOnce appliance. They plan to use NetBackup and need the highest performance setup they can get. Their local hosts are connected
via FC and the rest are connected via a WAN.
Which backup target type should you recommend?
A customer has the following requirements for a storage solution:
VMware environment
20 ТВ of standard business data
400 TB of video archive files
10 GB iSCSI connectivity
They are most concerned with the cost of the solution.
Which HPE storage solution offers the lowest cost while meeting the customer requirements?
You are handing over the installed array to customer. The customer wants to review the amount of HDDs and SSDs in the system.
Click the relevant menu option where the front panel of the head shelf can be visualized.
Which tool is used to configure an HPE MSA 2052?
You need to create an N:M relationship between VMware hypervisors and virtual volumes with the least amount of administrative overhead.
Click the option where you can create a group of VMware hypervisors for volumes provisioning.
Which protocol can be used for accessing StoreOnce VTL target from Veeam?
You are designing a new enterprise array solution. The customer is interested in a caching tier that provides extremely low-latency and persistent storage at the same time. They also need to support more
than 500GB.
Which technology should you recommend?
A customer has completely virtualized their datacenter with VMware. You propose a SimpliVity solution to replace their aging hardware.
Which SimpliVity features should you emphasize in your presentation? (Choose two.)
You are configuring a new HPE 3PAR solution and need to create a new disk group with a defined RAID level.
Click the appropriate option where the RAID can be selected.