HCL Software Academy HCL-BF-PRO-10 Exam With Confidence Using Practice Dumps

• If UDP is not allowed on a network segment, the BigFix clients on that segment will not receive the UDP notifications from the server or relay, and will rely on the default 45-minute polling interval to check for new actions.1
• To reduce the delay in receiving new actions, you can enable the client polling feature, which allows the clients to poll the server or relay more frequently for new commands.2
• To enable the client polling feature, you need to set two client settings on the target clients:2
• You can set these client settings either through the console or manually on the endpoint.4
• After setting these client settings, the clients will poll the server or relay at the specified interval and receive new actions faster.

References:

• 1: https://help.hcltechsw.com/bigfix/9.5/platform/Platform/Installation/c_sample_proxy_configurations.html
• 2: https://help.hcltechsw.com/bigfix/9.5/platform/Platform/Config/r_client_set.html#_BESClient_Comm_CommandPollEnable
• 3: https://forum.bigfix.com/t/an-overview-on-the-client-evaluation-cycle/28056
• 4: https://help.hcltechsw.com/bigfix/9.5/platform/Platform/Config/r_client_set.html#Making_a_configuration_setting

• A BigFix Enterprise Server (BES) is the central component of the BigFix architecture that manages and communicates with the BigFix agents and relays1.
• The BES consists of several subcomponents, such as the root server, the console, the web reports, the web UI, and the server API1.
• The BES can support up to 300,000 endpoints in a single deployment, depending on the hardware configuration, network bandwidth, and workload2.
• The BES capacity planning document provides guidelines and recommendations for sizing and scaling the BES components based on various factors, such as cores, memory, network, storage, cloud, and concurrent users2.
• The BES capacity planning document also provides examples of typical deployments and best practices for optimizing the BES performance and stability2. References:
• BigFix Platform Overview
• BigFix Capacity Planning

To upgrade a stand-alone WebUI server, the following steps are required:

• Copy the BigFix WebUI installer (default location is %PROGRAM FILES%\BigFix Enterprise\BES Installers\WebUI) to the client computer that is running the BigFix WebUI.
• Stop the WebUI service.
• Run the installer on the computer that is running the WebUI. The installer detects the WebUI and offers to upgrade it for you. Follow the installer instructions to upgrade the BigFix WebUI.
• Start the WebUI service.

References:

• Upgrading the WebUI
• Stand-alone Web Reports upgrade? - Platform - BigFix Forum