Exact Extract — Huawei Training Material, Page 153 (Slide 27):
Dynamic reconstruction: If the number of member disks in the disk domain is fewer than M+N, the system reduces the number of data columns (M) and retains the number of parity columns (N) during reconstruction. This method retains the RAID level, ensuring system reliability.
Huawei OceanStor RAID 2.0+ provides dynamic reconstruction capabilities to improve storage reliability when available disk resources become insufficient for the original RAID layout.
In a RAID M+N configuration, M represents the number of data columns and N represents the number of parity columns.
For RAID 22+2, the system uses 22 data columns and two parity columns.
The two parity columns provide protection against a maximum of two unavailable chunks within a chunk group.
Dynamic reconstruction can reduce the number of data columns while retaining the configured parity-column count.
For example, an existing RAID 4+2 layout may be reconstructed into RAID 3+2 when fewer physical disks are available.
However, dynamic reconstruction does not increase the number of parity columns or allow recovery of data when failures exceed the available parity protection.
In the stated 25-SSD storage pool, simultaneous removal of three SSDs can result in three missing chunks within protected chunk groups.
RAID 22+2 cannot reconstruct a group with three missing chunks because only two parity chunks are available.
Therefore, the described three-SSD failure cannot be assumed recoverable through dynamic reconstruction.
Verification clarification: If disks fail sequentially and reconstruction completes between failures, the outcome may differ. The question is evaluated as three SSDs being removed without intervening completed reconstruction.
Therefore, the answer is FALSE.