Pass H12-261 Exam Guide

HCIE-Routing & Switching (Written) Questions and Answers

Question 41

Huawei exchanged two sets of SWA.SWB 7 , SW connected through the root Ethernet and configured the static channel aggregation chain to change the port corresponding to

Ethernet1/0/3. Ethernet1/0/3. Ethernet1/0/4. Ethernet1/0/5. Ethernet1/0/6. Ethernet1/0/7, configuration mode.

The order is configured in turn if the exchange is changed to SWA.SWB 6 Each aggregation only supports group ports.

Options:

When the configuration of each port is consistent, port, Ethernet1/0/7 Unselected

When the configuration of each port is consistent, port, Ethernet1/0/6 Unselected

In the case of consistent port configuration, random port aggregation in each port, SWA 7 Unselected selected as group port

In the case of consistent port configuration, port, Ethernet1/0/1 Unselected

Question 42

About FTP, ? Protocol Which of the following descriptions is correct

Options:

In the mode, the client completes the control and data FTP Passive, the TCP user's initialization

In the mode, the server is connected to the command FTP Active, "PORT is used to tell the client which port it wants to send data to.

FTP TCP always uses a remote control information and data information

FTP TCP 20, ICP 21 Always use the far port to establish a data session. Use the port to establish control.

Session E.FTP TCP 21, TCP 20 Always use the far port to establish a data session Use the port to establish a control session

Question 43

In the process of using the network P4 Pv6 and PV4/IPv6 addresses in the network to change addresses, many techniques have been used. These skills are divided into two

The first one is the v4/P6, Pv4/IP6? ( ) interoperability technology. Which of the following technologies are coexisting technologies?

Options:

NAT64

IPv6 over IPv4

Dual-Stack

ISATAP

Question 44

If the network protocol PM-SM, RP, RP RP RP, and RP are configured in the network, the configuration mode is divided into dynamic and static.

The correct one is

Options:

When configuring dynamic, the RP and BSR RP need to be configured as the backup.

The RP and BSR RP need to be configured with advertised information.

When configuring static BP, PIM RP needs to specify information on all routers.

When the configuration is dynamic, the RP and BSR do not need to be configured.

Labour Day Special - Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: top65certs

HCIE-Routing & Switching (Written) Questions and Answers

Options:

Answer:

Options:

Answer:

Options:

Answer:

Options:

Answer: