Pass CPIM-Part-2 Exam Guide

A company’s process technology and equipment should be characterized by product-independent processes and flexible automation if its competitive business strategy is based on offering customized products or features and a rapid response to market shifts. Product-independent processes are processes that can produce a variety of products or features without requiring major changes or adjustments in the production system. Flexible automation is a type of automation that can adapt to different product specifications or volumes by using programmable or reconfigurable machines, robots, or software. Product-independent processes and flexible automation can enable a company to offer customized products or features and a rapid response to market shifts by allowing it to:

• Produce small batches or single units of products or features that meet specific customer needs or preferences.
• Switch quickly and easily between different products or features without losing time or efficiency.
• Incorporate new technologies, materials, or designs into the production system without disrupting the existing operations.
• Respond to changes in demand or supply by adjusting the production capacity or output accordingly.

Continuous flow processes and a high degree of fixed automation are not suitable for a company’s process technology and equipment if its competitive business strategy is based on offering customized products or features and a rapid response to market shifts. Continuous flow processes are processes that produce products or features in a continuous and uninterrupted manner, without any breaks or buffers between the stages. Fixed automation is a type of automation that uses specialized machines or equipment that are designed to perform a specific task or operation. Continuous flow processes and fixed automation can enable a company to achieve high efficiency, productivity, and quality, but they also have some limitations, such as:

• They are suitable for producing large volumes of standardized products or features that have stable and predictable demand.
• They are difficult and costly to modify or change when there is a need to produce different products or features or to incorporate new technologies, materials, or designs.
• They are inflexible and rigid when there are variations or fluctuations in demand or supply, as they cannot adjust the production capacity or output easily.

Product-independent processes with parallel production lines are not appropriate for a company’s process technology and equipment if its competitive business strategy is based on offering customized products or features and a rapid response to market shifts. Product-independent processes with parallel production lines are processes that use multiple identical machines or equipment that can produce the same product or feature simultaneously. Product-independent processes with parallel production lines can enable a company to increase its production capacity and output, but they also have some drawbacks, such as:

• They are suitable for producing high volumes of standardized products or features that have high and constant demand.
• They are inefficient and wasteful when there is a need to produce different products or features or to incorporate new technologies, materials, or designs, as they require duplication of resources and equipment.
• They are redundant and unnecessary when there are variations or fluctuations in demand or supply, as they create excess inventory or idle capacity.

Product-dependent processes and automation based on product volume are not optimal for a company’s process technology and equipment if its competitive business strategy is based on offering customized products or features and a rapid response to market shifts. Product-dependent processes are processes that can produce only one type of product or feature, or that require significant changes or adjustments in the production system to produce different products or features. Automation based on product volume is a type of automation that uses different machines or equipment depending on the volume of production required for each product or feature. Product-dependent processes and automation based on product volume can enable a company to optimize its production costs and quality, but they also have some disadvantages, such as:

• They are suitable for producing low volumes of specialized products or features that have low variability and uncertainty in demand.
• They are complex and time-consuming when there is a need to produce different products or features or to incorporate new technologies, materials, or designs, as they require frequent changes or setups in the production system.
• They are unresponsive and slow when there are variations or fluctuations in demand or supply, as they cannot adapt the production capacity or output quickly.

References := Process Technology - an overview | ScienceDirect Topics, Flexible Automation - an overview | ScienceDirect Topics, Continuous Flow Process - an overview | ScienceDirect Topics, Fixed Automation - an overview | ScienceDirect Topics, Parallel Production Line - an overview | ScienceDirect Topics, Product Dependent Process - an overview | ScienceDirect Topics

Implosion in distribution requirements planning (DRP) is the process of calculating the gross requirements for a supplying location based on the net requirements of its customers or demand sources1. Implosion is the opposite of explosion, which is the process of calculating the net requirements for a demand source based on the gross requirements of its customers or demand sources2. Implosion and explosion are used to synchronize the supply and demand across different levels of the distribution network3.

An example of implosion in DRP is gathering information from several field locations and aggregating it at the manufacturing facility. This example shows how the manufacturing facility, which is the supplying location, can determine its gross requirements by adding up the net requirements of its field locations, which are its customers or demand sources. This way, the manufacturing facility can plan its production and inventory levels to meet the demand from the field locations.

A benefit of the ISO 9000 series of specifications is that purchasers may accept ISO 9001 certifications, minimizing additional surveys. ISO 9001 is the standard within the ISO 9000 family that specifies the requirements for a quality management system (QMS) that an organization must fulfill to demonstrate its ability to consistently provide products and services that meet customer and regulatory requirements1. ISO 9001 certification is a third-party verification that an organization has implemented and maintained a QMS that conforms to the ISO 9001 standard2. By obtaining ISO 9001 certification, an organization can provide objective evidence of its quality performance to its customers, suppliers, regulators, and other stakeholders3. This can reduce the need for additional audits or surveys by the purchasers, as they can rely on the ISO 9001 certification as a proof of quality assurance4. This can save time, money, and resources for both the purchasers and the suppliers, as well as improve their trust and confidence in each other5.

References: 1: ISO 9000 Vs. 9001 3 2: ISO 9000 Standard: Benefits, How to Achieve 4 3: The Ultimate Guide to ISO 9000 5 4: ISO 9000 Certification Guide 1 5: ISO - Selection and use of the ISO 9000 family of standards 6

Scrap allowance is a percentage or quantity of material that is expected to be lost or wasted during the production process. Scrap allowance is usually applied to the component items in a bill of materials (BOM), which is a document that lists the materials, quantities, and relationships required to produce an end item. An increase in the scrap allowance in an assembled item will result in replanning of the component items in material requirements planning (MRP), which is a system that calculates the timing and quantity of materials and resources needed to meet the production plan. Replanning of the component items in MRP means that the system will adjust the planned order releases, order quantities, and due dates of the component items to account for the increased scrap allowance. Replanning of the component items in MRP will ensure that enough material is available to meet the demand for the assembled item, and to avoid shortages or excess inventory.

References: CPIM Exam Content Manual Version 7.0, Domain 4: Plan and Manage Supply, Section 4.2: Implement Supply Plans, Subsection 4.2.1: Describe how to implement material requirements planning (MRP) (page 38).