NSE7_SSE_AR-26 VCE Exam Download

Before FortiGate can steer traffic according to SD-WAN rules, certain configuration elements must be present. Fortinet SD-WAN design guidance describes the required elements: " SD-WAN is not a standalone feature and interacts with several fundamental FortiGate configurations. Specifically, you must: (1) Define the interfaces (physical, VLAN, or IPsec) that will act as SD-WAN members, (2) Create firewall policies to allow traffic to be steered by SD-WAN, and (3) Set up routing so that traffic has valid routes via SD-WAN members. Without these, SD-WAN rules will not be able to match or steer any traffic. " Security profiles and traffic shaping are not mandatory for basic SD-WAN steering but can be layered on for enhanced security and QoS once foundational elements are present.References: A deployment should preserve the distinction between the physical or logical WAN underlay, the IPsec overlay and the SD-WAN zone that groups forwarding members. These layers can have different routing and security-policy requirements. The configured architecture must also allow the required traffic paths and failover behavior rather than assuming every available interface is interchangeable.

FortiSASE Secure Private Access enables protected communication between remote users, branch locations, and enterprise resources through FortiSASE security points of presence and FortiGate SPA hubs.

Option B is correct because SPA supports server-initiated communication from resources behind FortiGate SPA hubs to FortiClient agent-based remote users. This bidirectional capability requires appropriate From hubs security policies and routing.

Option D is correct because agent-based users can access private applications behind Fortinet Secure SD-WAN hubs. FortiSASE establishes IPsec overlays to the hubs, while BGP exchanges reachability information for protected networks.

Option E is correct because thin-edge locations and branch on-ramp devices can access private applications through FortiSASE. Fortinet explicitly documents access from FortiAP, FortiExtender, and branch on-ramp deployments to private networks through SPA.

Option A is incorrect because internet-bound traffic is principally associated with Secure Internet Access (SIA), rather than SPA.

Option C is not a standard SPA hub-to-hub service flow. SPA primarily connects FortiSASE users and edge locations with private resources behind SPA connectors. Inter-site traffic may use other supported SD-WAN or specifically configured inter-PoP paths.

The distinction is important: Fortinet documents thin-edge and branch-on-ramp access to private resources as a supported SPA use case.

When you enable ADVPN (auto-discovery VPN) in the overlay template, FortiManager automatically updates both the IPsec and BGP templates on the hub so that shortcut tunnels can be established dynamically. ADVPN can be activated in the SD-WAN overlay template for any supported topology, including dual-hub primary–primary, not just single hub. A deployment should preserve the distinction between the physical or logical WAN underlay, the IPsec overlay and the SD-WAN zone that groups forwarding members. These layers can have different routing and security-policy requirements. The configured architecture must also allow the required traffic paths and failover behavior rather than assuming every available interface is interchangeable. Before applying a topology change, review the interface dependencies, static and dynamic routing, security policies and provisioning templates. FortiGate can support multiple transport types, but routing and tunnel compatibility still determine whether the intended member is operationally eligible. In the relevant Fortinet FortiOS documentation, the applicable feature should be verified against the deployed software version, the selected configuration mode and the live operational state before the answer is treated as a definitive implementation requirement.

According to the FortiSASE 25 Enterprise Administrator Study Guide, page 25, branch on-ramp deployment enables organizations to secure outbound internet traffic from branch locations by connecting their existing network infrastructure to FortiSASE.

Option A is correct: Branch on-ramp allows remote offices and branch locations to establish secure IPsec VPN tunnels between their FortiGate or supported third-party network devices and FortiSASE points of presence (PoPs). Traffic is forwarded through these tunnels, allowing FortiSASE to deliver cloud-based security inspection and enforcement.

The study guide explains that connected branches can benefit from Secure Internet Access (SIA), Secure SaaS Access (SSA), and Secure Private Access (SPA).

Option B is incorrect: Although branch on-ramp supports secure private application access, providing access through a bookmark portal is not its primary deployment benefit.

Option C is incorrect: Branch on-ramp provides secure network connectivity and traffic inspection. It is not designed primarily for endpoint inventory, administration, or lifecycle management.

Option D is incorrect: The study guide explicitly states that FortiClient installation is not required for branch edge-device deployments and that ZTNA tags are not supported in this configuration.

Therefore, branch on-ramp primarily enables organizations to extend FortiSASE cloud security services to branch offices and secure their internet-bound traffic.

Exact Source References:

FortiSASE 25 Enterprise Administrator Study Guide, page 25 — Thick Edge Use Case, including secure branch outbound traffic and branch on-ramp.

FortiSASE 25 Enterprise Administrator Study Guide, page 26 — FortiSASE Branch On-Ramp Configuration.

FortiSASE 25 Enterprise Administrator Study Guide, page 27 — Edge-Device Policies, explaining the lack of ZTNA tag support.