Inspection and Testing of Fire Alarm Systems ITFAS-Level-1 Exam Dumps

This is a documentation requirement, and it’s found inChapter 14of NFPA 72, which deals withInspection, Testing, and Maintenance.

NFPA 72 (2022), Section 14.6.3.1:

"Records shall be retained for a period of one year after the next test and until the next test is performed. Records shall be made available to the authority having jurisdiction upon request."

Section14.6.3lays out theformat, retention, and content requirementsfor inspection, testing, and maintenance records.

Correct answer: D. 14.6.3

Tip: For questions involvingrecordkeeping, head straight toChapter 14, especially section14.6.

===========

After an initiating device (like a smoke detector or pull station) is triggered, NFPA 72 limits how long thecontrol unit can delay its responseto initiating notification appliances and/or signal transmission.

NFPA 72 (2022), Section 10.11.1.1:

“Fire alarm and emergency alarm initiating devices shall be arranged to initiate the intended alarm or response within 10 seconds unless otherwise permitted. The total delay shall not exceed 30 seconds.”

Correct answer: C. 30 seconds

===========

Visible notification appliances used in fire alarm systems (like strobes) must be eitherclear or redto distinguish them from other building systems.

NFPA 72 (2022), Section 18.5.1.4:

“Visible signals used in fire alarm systems shall be clear or nominal red in color.”

This ensuresstandardized visual recognitionduring fire emergencies.

Correct answer: D. Clear or red

===========

NFPA 72 identifies severaltypes of fire alarm control units (FACUs)based on their function and scope.

NFPA 72 (2022), Section 3.3.103 — Fire Alarm Control Unit (FACU):

Dedicated Function FACU: Performs a specific fire alarm role (e.g., elevator recall or sprinkler monitoring).

Protected Premises FACU: Installed on-site to monitor and signal within that building.

Releasing Service FACU: Activates fire suppression systems like gas or foam.

"Central station" is asupervising station, not a control unit.

Correct answers:

Dedicated function

Protected premises

Releasing service

===========