HPE6-A90 Exam Results

Technical explanation

An 802.1Q trunk must interpret untagged frames consistently at both ends. Matching native VLAN configuration prevents an untagged frame from being mapped to different VLANs across the link. Also compare the allowed VLAN list, tagged/untagged treatment and whether the platform tags the native VLAN by explicit policy. Symmetric tagging may be valid as a separate design decision, but it is not a substitute for agreement on VLAN semantics. Test management and user reachability after any trunk change to detect silent VLAN leakage or blackholing. Native VLAN is a deliberate configuration, not something the switch dynamically chooses from broadcasts. Using different native VLANs can leak untagged traffic into unintended segments. Tagging the native VLAN on both sides is a separate compatible design, not the general consistency rule the question tests.

Official HPE references | Creating a VLAN Profile • Step 3—Configuring VLANs and Port Profiles | Study-guide topic: Managing Wired Networks with HPE Aruba Networking Central

Technical explanation

Anomaly detection compares observed telemetry against baselines rather than relying exclusively on static thresholds. Recurrent association failures, unusual RF retries, interface errors and abnormal device restarts can then be surfaced before incident volume grows. AI Insights should be treated as a prioritized diagnostic hypothesis: verify affected sites and devices, inspect contributing evidence, and implement a controlled corrective change. Not every recommendation is executed automatically; change control and operational ownership remain with administrators.

B reduces the platform to ticket creation, ignoring telemetry correlation and recommendations. C incorrectly portrays hardware replacement as a standard autonomous step. Engineers still assess whether an insight points to RF conditions, authentication, software, or failing hardware.

Official HPE references | AirMatch • AOS-10 Cloud Services | Study-guide topic: Network Management with HPE Aruba Networking Central

Technical explanation

WPA3-Enterprise enables 802.1X/EAP-based per-user authentication rather than a shared preshared key. Select EAP-TLS when the policy mandates client certificates; provision trusted PKI roots, server certificates, identity mappings and renewal procedures. EAP-TLS offers mutual certificate-based validation and avoids the password-only model, but WPA3-Enterprise is the WLAN security family and EAP-TLS is the specific authentication method. WPA3-Personal is password-oriented, and transition mode or RadSec transport alone does not impose employee certificate authentication.

WPA3-Personal relies on SAE with a shared passphrase, not enterprise EAP-TLS identity. WPA3 transition options address interoperability and RadSec secures RADIUS transport; neither alone establishes the requested client-certificate mode.

Official HPE references | Configuring VLAN Settings for WLAN SSID in Tunnel and Mixed Mode • AOS-10 Cloud Services | Study-guide topic: Introduction to AOS-10

Technical explanation

A device group is a logical configuration target independent of physical site membership, making it suited to switches distributed among 30 branches. Associate common VLAN and syslog profiles with that group, then assign each switch to its genuine physical site for operational reporting. Confirm that site-level variations such as management addresses or local gateway IPs are not accidentally overwritten. A temporary site falsifies location data, and global scope would apply configurations to more devices than the intended group.

Global scope risks including switches outside the intended thirty. Assigning everything temporarily to one site falsifies location and complicates operational visibility. Device-group scope permits common configuration across real sites without corrupting site membership. Create the profiles under Configuration at Device Groups scope, then apply them to the switch function; keep each switch associated with its actual site.

Official HPE references | Multi-Level Hierarchy • System Profiles | Study-guide topic: Managing Wired Networks with HPE Aruba Networking Central