Download Full Version PCNSE Paloalto Networks Exam

SSL/TLS profile is only the TLS versions, not ciphers. Decryption Profile is for SSL Inbound and Forward Proxy applications, not mgmt of the PANW Firewall. There's also KB articles to strengthen SSH, but I couldn't find any for HTTPS, on the mgmt interface: &lang=en_US%E2%80%A9

In a High Availability (HA) configuration, particularly in an active-passive setup, it's crucial that the passive unit is kept up to date with the current state of the active unit. This ensures a seamless transition in the event of a failover. The HA4 interface is dedicated to this synchronization task.

D. Perform synchronization of sessions, forwarding tables, and IPSec security associations between firewalls in an HA pair:

The HA4 interface is responsible for the synchronization of critical stateful information between the active and passive units in an HA pair. This includes session information, ensuring that the passive unit can continue existing sessions without interruption if it needs to become active.

In addition to session information, HA4 also synchronizes forwarding tables, which contain information on how to route packets, and IPSec security associations, which are necessary for maintaining secure VPN tunnels.

This synchronization ensures that both units in an HA pair have identical information regarding the current state of the network, sessions, and security associations, enabling a smooth and immediate transition to the passive unit in case the active unit fails.

When using the log forwarding built-in action with tagging in Palo Alto Networks firewalls, the primary purpose is to dynamically respond to threats or unwanted traffic identified by the firewall's threat detection mechanisms. The action involves tagging the IP address associated with the unwanted traffic and then using that tag in dynamic security policies to block or manage the traffic.

A. Destination IP addresses of selected unwanted traffic are blocked:

When the tagging action is used, the firewall tags the IP addresses involved in the unwanted traffic (which could be the source or destination IP addresses, but in many configurations, the focus is on the source of the attack). These tags can then be referenced in Dynamic Address Groups (DAGs) within security policies. Consequently, any traffic coming from or going to these tagged IP addresses can be blocked or subjected to specific security rules, effectively mitigating the threat or unwanted behavior.

This approach allows for automated, real-time responses to identified threats, enhancing the security posture by quickly adapting to emerging threats without manual intervention.