Download Full Version JN0-452 Juniper Exam

When using location-based services (LBS) at a new warehouse and placing APs on the floor plan with correct scale while ensuring correct location accuracy in this scenario where APs are mounted on trusses 14 feet (4.3 meters) from floor, two actions that should be taken are installing Virtual Beacons in each aisle and configuring height of each AP. So the correct answers are A. Install Virtual Beacons in each aisle and B. Configure height of each AP.

According to Wikipedia1, 802.1X is an IEEE Standard for port-based network access control (PNAC). It provides an authentication mechanism to devices wishing to attach to a LAN or WLAN using Extensible Authentication Protocol (EAP) over wired IEEE 802 networks and over 802.11 wireless networks, which is known as “EAP over LAN” or EAPOL.

The authentication process involves three parties: a supplicant (the client device), an authenticator (the network device such as an access point), and an authentication server (typically a RADIUS server). The supplicant must provide valid credentials to the authenticator before it can access the network resources.

The credentials are exchanged with a RADIUS server prior to the 4-way Handshake because the 4-way Handshake is used to establish encryption keys between the supplicant and authenticator after successful authentication2. The credentials are exchanged with a RADIUS server after the 802.11 Association because the 802.11 Association is used to establish a logical link between the supplicant and authenticator before authentication can take place3.

Two correct statements about Juniper Mist Dynamic Packet Capture are that no configuration is necessary for Mist’s Dynamic Packet Capture and it is automatically attached to a client event displayed on the Insights page. So the correct answers are A. No configuration is necessary for Mist’s Dynamic Packet Capture and B. It is automatically attached to a client event displayed on the Insights page.