300-640 Premium Exam Questions

The UCS X9516 X-Fabric Module provides PCIe Gen5 connectivity between supported M8 compute nodes and X580p PCIe nodes. Before enabling that connectivity, the affected compute nodes must be powered down and equipped with the appropriate UCS PCI Gen5 mezzanine cards .

Cisco identifies the UCSX-V5-PCIME rear mezzanine card as a required hardware component for X580p connectivity. The card provides PCIe Gen5 electrical lanes between each CPU and the X9516 X-Fabric modules. Cisco also specifies that companion compute-node host power must be off for insertion or removal operations involving X580p PCIe connectivity, and that X9516 modules must be installed before the X580p PCIe nodes are installed.

Therefore, powering down the affected blades and installing their required PCI mezzanine cards are the appropriate preparatory actions.

The IFMs provide normal UCS network connectivity and do not need to be powered off or disconnected from Fabric Interconnects merely to install the X-Fabric modules. Similarly, disconnecting the Device Connector is unrelated to physical PCIe fabric installation and would unnecessarily interrupt Intersight connectivity.

Study Guide Reference: AI Infrastructure Deployment and Data Management — Cisco UCS X-Series GPU expansion, X-Fabric, PCIe connectivity, and hardware deployment.

===============

Extended Power Capacity is specifically designed to increase usable power in a Cisco UCS X-Series chassis while the chassis remains configured in a redundant power mode. Cisco states that enabling Extended Power Capacity permits the chassis to borrow power capacity from the supplies reserved for redundancy, thereby increasing the total power that can be allocated to workloads.

Cisco provides a six-PSU example in Grid redundancy mode. Without Extended Power Capacity, the workload is capped at 8,400 W. Enabling the feature increases the available workload capacity to approximately 9,660 W—an increase of 15 percent—while retaining the configured redundant power mode.

Power capping in option A would restrict consumption rather than make additional power available. Adding more PSUs is impossible when the chassis already contains its supported complement of six supplies. Disabling Extended Power Capacity would reduce rather than increase the available power envelope.

This feature is particularly useful after installing additional accelerator, PCIe, memory, or compute resources that raise chassis power demand. It should nevertheless be applied within the data center's electrical and thermal design limits.

Study Guide Reference: AI Infrastructure Operations and Troubleshooting — UCS X-Series chassis power policy, redundancy, Extended Power Capacity, and capacity management.

===============