Juniper JN0-451 Dumps

When a customer replaces their previous WLAN controller with a Mist Edge in order to maintain centralization of user traffic, control plane forwarding applies to the Mist Cloud while data plane forwarding applies to the Mist Edge. So the correct answer is A. Control plane forwarding applies to the Mist Cloud and data plane forwarding applies to the Mist Edge.

According to Wikipedia1, 802.1X is an IEEE Standard for port-based network access control (PNAC). It provides an authentication mechanism to devices wishing to attach to a LAN or WLAN using Extensible Authentication Protocol (EAP) over wired IEEE 802 networks and over 802.11 wireless networks, which is known as “EAP over LAN” or EAPOL.

The authentication process involves three parties: a supplicant (the client device), an authenticator (the network device such as an access point), and an authentication server (typically a RADIUS server). The supplicant must provide valid credentials to the authenticator before it can access the network resources.

The credentials are exchanged with a RADIUS server prior to the 4-way Handshake because the 4-way Handshake is used to establish encryption keys between the supplicant and authenticator after successful authentication2. The credentials are exchanged with a RADIUS server after the 802.11 Association because the 802.11 Association is used to establish a logical link between the supplicant and authenticator before authentication can take place3.

According to the Virtual Network Assistant | Juniper Networks US document3, two SLEs that measure the amount of time that it takes for a process to complete are:

• Roaming, which measures how long it takes for a client to switch from one AP to another without losing connectivity.
• Time to Connect, which measures how long it takes for a client to complete all steps of network access such as authentication, DHCP, and DNS.

References:

According to the exhibit, the organization has a total of two licenses for Marvis wireless, and one of them is in use. Therefore, the organization has one available license and one used license for Marvis wireless.

According to the Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide1, there are two ways to access Marvis, which is a virtual network assistant that provides insights and troubleshooting for wireless networks:

• Use the conversational assistant, which allows you to ask natural language questions and get answers from Marvis.
• Use Actions, which are predefined queries that you can select from a list and get results from Marvis.

References:

The AI VALIDATED status update means that the issue was opened and Marvis confirms it has been closed.

According to the Marvis Virtual Network Assistant Datasheet1, the AI-VALIDATED status update means that the issue was opened and Marvis confirms it has been closed. This status indicates that Marvis has verified that the issue is no longer present and the root cause has been resolved.

References:

Channel bonding combines two adjacent channels to create a wider channel, effectively doubling the available bandwidth. However, this also doubles the required device resources such as power and processing.

According to the Lecture 3 - Radio Frequency and Antenna Fundamentals - Part 2 document2, channel bonding is a technique that combines two adjacent channels into one wider channel to increase throughput. This doubles the available bandwidth but also doubles the required device resources such as power and processing.

References:

According to the Wi-Fi configuration with Mist Systems | HCD Consulting GmbH document, three available rate limiting options in the Mist UI are:

References:

According to Wikipedia1, 802.1X is an IEEE Standard for port-based network access control (PNAC). It provides an authentication mechanism to devices wishing to attach to a LAN or WLAN using Extensible Authentication Protocol (EAP) over wired IEEE 802 networks and over 802.11 wireless networks, which is known as “EAP over LAN” or EAPOL.

The authentication process involves three parties: a supplicant (the client device), an authenticator (the network device such as an access point), and an authentication server (typically a RADIUS server). The supplicant must provide valid credentials to the authenticator before it can access the network resources.

The credentials are exchanged with a RADIUS server prior to the 4-way Handshake because the 4-way Handshake is used to establish encryption keys between the supplicant and authenticator after successful authentication2. The credentials are exchanged with a RADIUS server after the 802.11 Association because the 802.11 Association is used to establish a logical link between the supplicant and authenticator before authentication can take place3.

Mist Radio Resource Management (RRM) performs several functions including transmit power control and channel assignment which help optimize wireless network performance by dynamically adjusting radio settings based on changing environmental conditions.So,the correct answers are A.transmit power control and C.channel assignment

According to the Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide1, two functions of Mist Radio Resource Management (RRM) are:

• Transmit power control, which adjusts the transmit power of APs based on their coverage area and interference level.
• Channel assignment, which assigns channels to APs based on their location and interference level.

References: