CertsTopics Logo

Summer Special Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 60certs

Huawei H35-560 Dumps

Page: 1 / 3
Total 84 questions
Get H35-560 Full Access Download H35-560 PDF

HCIA-LTE-RNP&RNO V1.0 Questions and Answers

Question 1

Which of the following is not a weak coverage solution?

Options:

A.

adjusteNodeBTransmit power

B.

Adjust the antenna azimuth and downtilt angle, increase the antenna height, and replace the high-altitude wire, etc.

C.

Adjust neighbor relations

D.

Check whether the room sub-system or repeater is working normally, and check whether there is other radio interference

Question 2

LTE power control does not affect the coverage and capacity of the system.

Options:

A.

True

B.

False

Question 3

Which of the following carrier bandwidths does LTE support? (multiple choice)

Options:

A.

40M

B.

5M

C.

15M

D.

20M

Question 4

The drive test scenario judges the success of the handover, usually based on the signaling. On the terminal side, which of the following signaling starts the handover process?

Options:

A.

Measurement Control

B.

Measurement Report

C.

Handover Request

D.

Handover Command

Question 5

Which of the following channel or signal is used to cell PCI identification and cell search process?

Options:

A.

PDSCH

B.

PDCCH

C.

PSS/SSS

D.

PCRCH

Question 6

In the drive test process, if RRC re-establishment occurs, it is judged that the random access failure of the UE is caused.

Options:

A.

True

B.

False

Question 7

Which of the following types of warm wires are commonly used? (multiple choices)

Options:

A.

1/2〃Feeder

B.

1/3〃Feeder

C.

7/8〃Feeder

D.

5/4〃Feeder

Question 8

The single-site verification test only needs to verify whether the cell status is normal in the idle mode.

Options:

A.

True

B.

False

Question 9

Which of the following results can be reported in the Measurement Report? (Multiple choice)

Options:

A.

RSRP

B.

SINR

C.

RSSI

D.

RSRQ

Question 10

In the downlink scheduling, which factors will affect the allocation of downlink shared resources and the selection of MCS? (Multiple Choice)

Options:

A.

UE capability level

B.

The wireless environment where the user is located

C.

Cache status

D.

PHR (power headroom report) of UE

Question 11

For the following LTE neighborhood planning, which description is correct? (Multiple choice)

Options:

A.

The directly adjacent cell geographically is generally used as a neighboring area.

For dense urban areas and ordinary urban areas, due to the relatively short distance between stations (0.3~1.0 km), neighboring areas should do more

B.

Because there is no sequence problem in the neighboring area of LTE, and the detection period is very short, it is only necessary to consider not missing the neighboring cells without needing to sort the neighboring cells strictly according to the signal strength.

C.

ANR function can completely replace the neighboring area planning of the initial network

Question 12

If the cell radius is 90 kilometers, which of the following should be used for the PRACH preamble format?

Options:

A.

Format 1

B.

Format 2

C.

Format 3

D.

Format 4

Page: 1 / 3
Total 84 questions
Get H35-560 Full Access Download H35-560 PDF